JVC LYT1325-001A manual EN Specifications, Camcorder, AC Adapter

Page 54

54 EN SPECIFICATIONS

Camcorder

For General

Power supply

DC 11 V (Using AC Adapter)

DC 7.2 V (Using battery pack)

Power consumption

Approx. 4.9 W (LCD monitor off, viewfinder on) Approx. 5.7 W (LCD monitor on, viewfinder off) Approx. 8.6 W (Maximum)

Dimensions (W x H x D)

62 mm x 101 mm x 115 mm

(with the LCD monitor closed, the viewfinder pushed back in and the lens ring detached)

Weight

Approx. 560 g

(without battery, cassette, memory card, lens cap and grip strap)

Approx. 650 g

(incl. battery, cassette, memory card, lens cap and grip strap)

Operating temperature

0°C to 40°C

Operating humidity

35% to 80%

Storage temperature

–20°C to 50°C

Pickup 1/3.6" CCD

Lens

F 1.8, f = 4.5 mm to 45 mm, 10:1 power zoom lens

Filter diameter

ø30.5 mm

LCD monitor

2.5" diagonally measured, LCD panel/TFT active matrix system

Viewfinder

Electronic viewfinder with 0.3" colour LCD

Speaker

Monaural

For Digital Video Camera

Format

DV format (SD mode)

Signal format

PAL standard

Recording/Playback format Video: Digital component recording

Audio: PCM digital recording, 32 kHz 4-channel (12-BIT),

48kHz 2-channel (16-BIT)

Cassette

Mini DV cassette

Tape speed

SP: 18.8 mm/s, LP: 12.5 mm/s

Maximum recording time (using 80 min. cassette) SP: 80 min., LP: 120 min.

For Digital Still Camera

Storage media

SD Memory Card/MultiMediaCard

Compression system

Still image: JPEG (compatible)

Moving image: MPEG4 (compatible)

File size Still image:

4 modes (1600 x 1200 pixels/1280 x 960 pixels/

1024 x 768 pixels/640 x 480 pixels) Moving image:

3 modes (352 x 288 pixels/240 x 176 pixels/160 x 120 pixels)

Picture quality

2 modes (FINE/STANDARD)

Approximate number of storable images

pg. 23

For Connectors

S/AV

S-Video input:

Y:0.8 V to 1.2 V (p-p), 75 , analogue

C:0.2 V to 0.4 V (p-p), 75 , analogue S-Video output:

Y:1.0 V (p-p), 75 , analogue

C:0.29 V (p-p), 75 , analogue

Video input: 0.8 V to 1.2 V (p-p), 75 , analogue

Video output: 1.0 V (p-p), 75 , analogue

Audio input: 300 mV (rms), 50 k, analogue, stereo

Audio output: 300 mV (rms), 1 k, analogue, stereo

Edit: ø3.5 mm, 2-pole

Microphone input ø3.5 mm, stereo

Headphone output ø3.5 mm, stereo

DV

Input/output: 4-pin, IEEE 1394 compliant

USB

Mini USB-B type, USB 2.0/1.1 compliant

AC Adapter

Power requirement

AC 110 V to 240 Vd, 50 Hz/60 Hz

Output

DC 11 V G, 1 A

Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.

Image 54
Contents To deactivate the demonstration, set Demo Mode to OFF Dear CustomerLYT1325-001A EN Program AE with Special Effects Wipe/Fader EffectsBacklight Compensation Navigation FunctionImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedCassettes marked Memory cards marked Before Using This CamcorderSo, for important recordings, we recommend using SP mode It is recommended that you use JVC brand cassette tapesFlash Brightness Adjustment Brightness Adjustment Of The DisplayChanging The Menu Settings White Balance Adjustment Manual White Balance AdjustmentEN Getting Started To open the connector cover, pull the bottomIndex End of the cover, then open itControls IndicatorsConnectors Other PartsDuring D.S.C. Recording Only Clock Icon pg Flash Indicator pgDuring Video Recording Only During E-Mail Clip RecordingW T During Video PlaybackDuring D.S.C. Playback I T / M I X LTo attach Provided AccessoriesHow To Attach/Detach The Lens Ring To detachHow To Attach The Shoulder Strap Audio Extension CableUsing The Battery Pack PowerCharging The Battery Pack Maximum continuous recording timePower-Linked Operation Operation ModeUsing AC Power About BatteriesDate/Time Settings Grip AdjustmentViewfinder Adjustment Tripod Mounting Brightness Adjustment Of The DisplayLoading/Unloading a Cassette To protect valuable recordingsLoading/Unloading a Memory Card Close the card coverTo protect valuable files available only for SD Memory Card Basic Recording Tape Remaining TimeLCD Monitor And Viewfinder Zoom EN Video RecordingInterface Shooting Zoom OutRecording From The Middle Of a Tape Normal PlaybackTime Code Video Playback ENShuttle Search If using a VCR, go to . If not, go to stepEN Video Playback Blank SearchInstalling The Battery Buttons And FunctionsBeam Effective Area indoor use Frame-By-Frame Playback Playback Special EffectsSlow-Motion Playback Playback ZoomInterval Shooting To cancel Interval Shooting modeC. Recording EN Approximate Number of Storable ImagesPlayback Of Video Clips Normal Playback Of ImagesAuto Playback Of Images EN D.S.C. PlaybackViewing File Information Index Playback Of FilesRemoving On-Screen Display Folder Folder name  pgTo reset the file name Resetting The File NameEN Additional Features for D.S.C Mail Clip RecordingProtecting Files Deleting FilesTo Remove Protection To Reset The Number Of Prints Initialising a Memory CardTo Print By Selecting Still Images And Number Of Prints Menus without Sub Menus Changing The Menu SettingsRecording Menus Menus with Sub MenusManual Enables thumbnail images to be made manually.  pg EN Menus for Detailed AdjustmentShutter speed is being automatically adjusted, is displayed 5SEC / 15SEC / 30SEC / 60SECWhen the Menu Screen is closed after Demo Mode is turned on  pg , Flash Brightness Adjustment pg , Brightness Adjustment Of The Display  pg , E-Mail Clip RecordingSound Mode and Narration Playback MenusFeatures for Recording EN Snapshot FlashIf C ±0A is selected EN Features for Recording Flash Brightness AdjustmentSelf-Timer Second RecordingManual Focus Motor Drive ModeSnapshot For Video Recording Exposure ControlIris Lock Spot Exposure ControlBacklight Compensation Wipe Or Fader Effects White Balance AdjustmentTo change the setting To return to automatic white balanceBefore continuing Program AE With Special EffectsNavigation Function Variable Shutter Speed 1/250 1/4000To cancel Navigation search midway Navigation SearchTo delete thumbnail images EN Editing To use this camcorder as a playerTo use this camcorder as a recorder Equipped With a DV Connector Digital DubbingUsing USB cable Using DV cable Connection To a Personal Computer Using USB cableUsing DV cable It is possible to do the following thingsEditing EN Audio DubbingInsert Editing To hear the dubbed sound during playbackSet Remote/VCR Code Buttons And Functions RM-V717UYou are now ready to try Random Assemble Editing Make Connections Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT connector VCR other than aboveOr manually engage the VCR’s Record-Pause mode Automatic Editing To VCREngage the Stop modes for the camcorder and the VCR Diagnosing VCR/Camcorder Timing Adjustment Of VCR/Camcorder TimingFor More Accurate Editing Play back the dubbed sceneAdvanced features EN TroubleshootingPower Video and D.S.C. PlaybackOther problems HPush in the memory card a few more times.  pgViewfinder is pulled out and Priority is set to Appears when the tape ends during recording or playback TroubleshootingAppears when no tape is loaded.  pg Appears if Audio Dubbing is attempted on a tapeTo clean the LCD monitor Cleaning The CamcorderTo clean the exterior To clean the lensEN Cautions Memory CardsLCD Monitor Main Unit EN Specifications CamcorderAC Adapter 12, 13 Recording Capacity18, 22 26, 40Victor Company of Japan, Limited