JVC LYT1325-001A manual C. Recording EN, Interval Shooting, Approximate Number of Storable Images

Page 23
Remove the lens cap.

Basic Shooting (D.S.C. Snapshot)

You can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card.

NOTE:

Before continuing, perform the procedures listed below:

Power ( pg. 12)

Loading a Memory Card ( pg. 16)

VIDEO/MEMORY SNAPSHOT

Power Switch

Lock Button

1

2 Open the LCD monitor fully. ( pg. 17)

3 Set the VIDEO/MEMORY Switch to “MEMORY”.

4 Set the Power Switch to A” or “Mwhile pressing down the Lock Button located on the switch.

To change the Image Size and/or Picture Quality,  pg. 29, 32.

5 Press SNAPSHOT. The “O” indication appears while the snapshot is being taken.

To check how the image looks before recording it in the

memory card, press SNAPSHOT halfway and hold. The “” indicator appears and stops blinking when the captured image is focused. To cancel the recording, release SNAPSHOT. To record it in the memory card, press SNAPSHOT fully.

Still images are recorded in the snapshot mode with no frame.

To delete unwanted still images, refer to “Deleting Files” ( pg. 27).

When you do not want to hear the shutter sound, set “BEEP” to “OFF”. ( pg. 29, 31)

NOTE:

If shooting is not performed for approx. 5 minutes when the Power Switch is set to “A” or “M” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, push back and pull out the viewfinder again or close and re-open the LCD monitor.

Approximate Number of Storable Images

The number increases or decreases depending on the Picture Quality/Image Size, etc.

Image Size/Picture

 

SD Memory Card

 

Quality

8 MB**

16 MB*

32 MB*

64 MB*

 

 

 

 

 

 

 

640 x 480/FINE

47

 

95

205

 

425

640 x 480/STANDARD

85

 

175

375

 

755

1024 x 768/FINE

21

 

47

95

 

200

1024 x 768/STANDARD

42

 

85

185

 

375

1280 x 960/FINE

13

 

29

60

 

125

1280 x 960/STANDARD

27

 

55

120

 

250

1600 x 1200/FINE

7

 

16

34

 

65

1600 x 1200/STANDARD

12

 

26

50

 

110

D.S.C. RECORDING EN 23

 

Image Size/Picture Quality

MultiMediaCard

 

 

 

 

 

16 MB*

32 MB*

 

 

 

640 x 480/FINE

105

215

 

 

 

640 x 480/STANDARD

225

470

 

 

 

1024 x 768/FINE

50

100

 

 

 

1024 x 768/STANDARD

100

205

 

 

 

1280 x 960/FINE

32

60

 

 

 

1280 x 960/STANDARD

65

130

 

 

 

1600 x 1200/FINE

17

35

 

 

 

1600 x 1200/STANDARD

29

55

 

 

 

 

*

Optional

 

 

**

Provided

 

 

Interval Shooting

During Interval Shooting mode, the camcorder continues to take snapshots automatically with an interval of your desired setting.

1 Set “INT.SHOT” to “ON”. ( pg. 29, 32)

“INTERVAL” and “” appear.

2 Set “INT.TIME” to the desired shooting interval. ( pg. 29, 32)

First shot is taken after 2 seconds.

PLAYBACK

3 Set the Power Switch to “A” or “M” while pressing

 

down the Lock Button located on the switch.

 

4 Press SNAPSHOT.

 

The “O” indicator appears while the snapshot is being

&

RECORDING

shooting interval set in step 2 has passed.

taken.

 

The clock icon “ ” turns while waiting for the next shot is

 

being taken.

 

The next shot is being taken automatically when the

(D.S.C.)

5 Press SNAPSHOT to stop Interval Shooting.

 

To cancel Interval Shooting mode

 

Set “INT.SHOT” to “OFF” in step 1.

CAMERA

NOTES:

 

To distinguish between still images taken in Interval

 

Shooting mode and other still images, it is recommended

STILL

that you reset the file names before shooting. ( pg. 26)

 

Interval Shooting will stop if the battery runs out of power or

 

the Memory Card becomes full.

DIGITAL

captured still images (Windows® only). To create movie

The function “Animation” in the provided software “Digital

 

Photo Navigator” can be used to create movie files from the

 

files with the Macintosh, it is recommended that you use the

 

function “Creating a Slideshow From Still Images” in the

 

commercial software “QuickTime Pro”.

 

Image 23
Contents LYT1325-001A EN To deactivate the demonstration, set Demo Mode to OFFDear Customer Navigation Function Wipe/Fader EffectsBacklight Compensation Program AE with Special EffectsBlue to N Neutral or Black Brown to L Live or Red Important for owners in the U.KIt is recommended that you use JVC brand cassette tapes Before Using This CamcorderSo, for important recordings, we recommend using SP mode Cassettes marked Memory cards markedWhite Balance Adjustment Manual White Balance Adjustment Brightness Adjustment Of The DisplayChanging The Menu Settings Flash Brightness AdjustmentEnd of the cover, then open it To open the connector cover, pull the bottomIndex EN Getting StartedOther Parts IndicatorsConnectors ControlsDuring E-Mail Clip Recording Clock Icon pg Flash Indicator pgDuring Video Recording Only During D.S.C. Recording OnlyI T / M I X L During Video PlaybackDuring D.S.C. Playback W TTo detach Provided AccessoriesHow To Attach/Detach The Lens Ring To attachAudio Extension Cable How To Attach The Shoulder StrapMaximum continuous recording time PowerCharging The Battery Pack Using The Battery PackAbout Batteries Operation ModeUsing AC Power Power-Linked OperationViewfinder Adjustment Date/Time SettingsGrip Adjustment To protect valuable recordings Brightness Adjustment Of The DisplayLoading/Unloading a Cassette Tripod MountingTo protect valuable files available only for SD Memory Card Loading/Unloading a Memory CardClose the card cover LCD Monitor And Viewfinder Basic RecordingTape Remaining Time Zoom Out EN Video RecordingInterface Shooting ZoomVideo Playback EN Normal PlaybackTime Code Recording From The Middle Of a TapeBlank Search If using a VCR, go to . If not, go to stepEN Video Playback Shuttle SearchBeam Effective Area indoor use Installing The BatteryButtons And Functions Playback Zoom Playback Special EffectsSlow-Motion Playback Frame-By-Frame PlaybackApproximate Number of Storable Images To cancel Interval Shooting modeC. Recording EN Interval ShootingEN D.S.C. Playback Normal Playback Of ImagesAuto Playback Of Images Playback Of Video ClipsFolder Folder name  pg Index Playback Of FilesRemoving On-Screen Display Viewing File InformationMail Clip Recording Resetting The File NameEN Additional Features for D.S.C To reset the file nameTo Remove Protection Protecting FilesDeleting Files To Print By Selecting Still Images And Number Of Prints To Reset The Number Of PrintsInitialising a Memory Card Menus with Sub Menus Changing The Menu SettingsRecording Menus Menus without Sub Menus5SEC / 15SEC / 30SEC / 60SEC EN Menus for Detailed AdjustmentShutter speed is being automatically adjusted, is displayed Manual Enables thumbnail images to be made manually.  pg pg , E-Mail Clip Recording  pg , Flash Brightness Adjustment pg , Brightness Adjustment Of The Display When the Menu Screen is closed after Demo Mode is turned onPlayback Menus Sound Mode and NarrationIf C ±0A is selected Features for Recording ENSnapshot Flash Second Recording Flash Brightness AdjustmentSelf-Timer EN Features for RecordingExposure Control Motor Drive ModeSnapshot For Video Recording Manual FocusBacklight Compensation Iris LockSpot Exposure Control To return to automatic white balance White Balance AdjustmentTo change the setting Wipe Or Fader EffectsVariable Shutter Speed 1/250 1/4000 Program AE With Special EffectsNavigation Function Before continuingTo delete thumbnail images To cancel Navigation search midwayNavigation Search To use this camcorder as a recorder EN EditingTo use this camcorder as a player Dubbing Equipped With a DV Connector DigitalIt is possible to do the following things Connection To a Personal Computer Using USB cableUsing DV cable Using USB cable Using DV cableTo hear the dubbed sound during playback Audio DubbingInsert Editing Editing ENYou are now ready to try Random Assemble Editing Set Remote/VCR CodeButtons And Functions RM-V717U VCR other than above Connect the editing cable to the Remote Pause connectorConnect the editing cable to the R.A.EDIT connector Make ConnectionsEngage the Stop modes for the camcorder and the VCR Or manually engage the VCR’s Record-Pause modeAutomatic Editing To VCR Play back the dubbed scene Adjustment Of VCR/Camcorder TimingFor More Accurate Editing Diagnosing VCR/Camcorder TimingVideo and D.S.C. Playback EN TroubleshootingPower Advanced featuresViewfinder is pulled out and Priority is set to Other problemsHPush in the memory card a few more times.  pg Appears if Audio Dubbing is attempted on a tape TroubleshootingAppears when no tape is loaded.  pg Appears when the tape ends during recording or playbackTo clean the lens Cleaning The CamcorderTo clean the exterior To clean the LCD monitorLCD Monitor EN CautionsMemory Cards Main Unit AC Adapter EN SpecificationsCamcorder 26, 40 Recording Capacity18, 22 12, 13Victor Company of Japan, Limited