JVC LYT1325-001A manual EN Cautions, Memory Cards, LCD Monitor

Page 52

52 EN CAUTIONS

 

Battery Packs

Cassettes

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions:

To avoid hazards

Terminals

... do not burn.

... do not short-circuit the

terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag.

... do not modify or disassemble.

... do not expose the battery to temperatures exceeding 60°C, as this may cause the battery to overheat, explode or catch fire.

... use only specified chargers.

To prevent damage and prolong service life

... do not subject to unnecessary shock.

... charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery — cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

... fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period time.

... remove from charger or powered unit when not in use, as some machines use current even when switched off.

To properly use and store your cassettes, be sure to read the following cautions:

During use

... make sure the cassette bears the Mini DV mark.

... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.

... make sure the cassette is positioned properly when inserting.

... do not load and unload the cassette repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage.

... do not open the front tape cover. This exposes the tape to fingerprints and dust.

Store cassettes

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary shock or vibration.

... where they won’t be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets).

... vertically, in their original cases.

Memory Cards

To properly use and store your memory cards, be sure to read the following cautions:

During use

... make sure the memory card bears the SD or MultiMediaCard mark.

... make sure the memory card is positioned properly when inserting.

NOTES:

It is recommended that only genuine JVC batteries are used in this camcorder. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications Charging: 10°C to 35°C Operation: 0°C to 40°C

Storage: –20°C to 50°C

The lower the temperature, the longer recharging takes.

Charging times are for a fully discharged battery pack.

While the memory card is being accessed (during

recording, playback, deletion, initialisation, etc.)

... never unload the memory card and never turn off the camcorder.

Store memory cards

... away from heaters or other heat sources.

... out of direct sunlight.

... where they won’t be subject to unnecessary shock or vibration.

... where they won’t be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets).

LCD Monitor

To prevent damage to the LCD monitor, DO NOT

... push it strongly or apply any shocks.

... place the camcorder with the LCD monitor on the bottom.

To prolong service life

... avoid rubbing it with coarse cloth.

Be aware of the following phenomena for LCD

monitor use. These are not malfunctions

... While using the camcorder, the surface around the LCD monitor and/or the back of the LCD monitor may heat up.

... If you leave power on for a long time, the surface around the LCD monitor becomes hot.

Image 52
Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFFLYT1325-001A EN Wipe/Fader Effects Backlight CompensationProgram AE with Special Effects Navigation FunctionImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedBefore Using This Camcorder So, for important recordings, we recommend using SP modeCassettes marked Memory cards marked It is recommended that you use JVC brand cassette tapesBrightness Adjustment Of The Display Changing The Menu SettingsFlash Brightness Adjustment White Balance Adjustment Manual White Balance AdjustmentTo open the connector cover, pull the bottom IndexEN Getting Started End of the cover, then open itIndicators ConnectorsControls Other PartsClock Icon pg Flash Indicator pg During Video Recording OnlyDuring D.S.C. Recording Only During E-Mail Clip RecordingDuring Video Playback During D.S.C. PlaybackW T I T / M I X LProvided Accessories How To Attach/Detach The Lens RingTo attach To detachHow To Attach The Shoulder Strap Audio Extension CablePower Charging The Battery PackUsing The Battery Pack Maximum continuous recording timeOperation Mode Using AC PowerPower-Linked Operation About BatteriesGrip Adjustment Date/Time SettingsViewfinder Adjustment Brightness Adjustment Of The Display Loading/Unloading a CassetteTripod Mounting To protect valuable recordingsClose the card cover Loading/Unloading a Memory CardTo protect valuable files available only for SD Memory Card Tape Remaining Time Basic RecordingLCD Monitor And Viewfinder EN Video Recording Interface ShootingZoom Zoom OutNormal Playback Time CodeRecording From The Middle Of a Tape Video Playback ENIf using a VCR, go to . If not, go to step EN Video PlaybackShuttle Search Blank SearchButtons And Functions Installing The BatteryBeam Effective Area indoor use Playback Special Effects Slow-Motion PlaybackFrame-By-Frame Playback Playback ZoomTo cancel Interval Shooting mode C. Recording ENInterval Shooting Approximate Number of Storable ImagesNormal Playback Of Images Auto Playback Of ImagesPlayback Of Video Clips EN D.S.C. PlaybackIndex Playback Of Files Removing On-Screen DisplayViewing File Information Folder Folder name  pgResetting The File Name EN Additional Features for D.S.CTo reset the file name Mail Clip RecordingDeleting Files Protecting FilesTo Remove Protection Initialising a Memory Card To Reset The Number Of PrintsTo Print By Selecting Still Images And Number Of Prints Changing The Menu Settings Recording MenusMenus without Sub Menus Menus with Sub MenusEN Menus for Detailed Adjustment Shutter speed is being automatically adjusted, is displayedManual Enables thumbnail images to be made manually.  pg 5SEC / 15SEC / 30SEC / 60SEC pg , Flash Brightness Adjustment  pg , Brightness Adjustment Of The DisplayWhen the Menu Screen is closed after Demo Mode is turned on  pg , E-Mail Clip RecordingSound Mode and Narration Playback MenusSnapshot Flash Features for Recording ENIf C ±0A is selected Flash Brightness Adjustment Self-TimerEN Features for Recording Second RecordingMotor Drive Mode Snapshot For Video RecordingManual Focus Exposure ControlSpot Exposure Control Iris LockBacklight Compensation White Balance Adjustment To change the settingWipe Or Fader Effects To return to automatic white balanceProgram AE With Special Effects Navigation FunctionBefore continuing Variable Shutter Speed 1/250 1/4000Navigation Search To cancel Navigation search midwayTo delete thumbnail images To use this camcorder as a player EN EditingTo use this camcorder as a recorder Equipped With a DV Connector Digital DubbingConnection To a Personal Computer Using USB cable Using DV cableUsing USB cable Using DV cable It is possible to do the following thingsAudio Dubbing Insert EditingEditing EN To hear the dubbed sound during playbackButtons And Functions RM-V717U Set Remote/VCR CodeYou are now ready to try Random Assemble Editing Connect the editing cable to the Remote Pause connector Connect the editing cable to the R.A.EDIT connectorMake Connections VCR other than aboveAutomatic Editing To VCR Or manually engage the VCR’s Record-Pause modeEngage the Stop modes for the camcorder and the VCR Adjustment Of VCR/Camcorder Timing For More Accurate EditingDiagnosing VCR/Camcorder Timing Play back the dubbed sceneEN Troubleshooting PowerAdvanced features Video and D.S.C. PlaybackHPush in the memory card a few more times.  pg Other problemsViewfinder is pulled out and Priority is set to Troubleshooting Appears when no tape is loaded.  pgAppears when the tape ends during recording or playback Appears if Audio Dubbing is attempted on a tapeCleaning The Camcorder To clean the exteriorTo clean the LCD monitor To clean the lensMemory Cards EN CautionsLCD Monitor Main Unit Camcorder EN SpecificationsAC Adapter Recording Capacity 18, 2212, 13 26, 40Victor Company of Japan, Limited