JVC LYT1325-001A manual Before Using This Camcorder, Cassettes marked Memory cards marked

Page 4

4 EN

SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way

switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Before Using This Camcorder

Make sure you only use cassettes with the Mini DV mark

.

Make sure you only use memory cards with the mark

or .

This camcorder is designed exclusively for the digital video cassette, SD Memory Card and MultiMediaCard. Only

cassettes marked “

” and memory cards marked

” or “

” can be used with this unit.

Remember that this camcorder is not compatible with other digital video formats.

Remember that this camcorder is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

Before recording important video, be sure to make a trial recording.

Play back your trial recording to make sure the video and audio have been recorded properly.

We recommend cleaning your video heads before use. If you haven’t used your camcorder for awhile, the heads may

be dirty. We recommend periodically cleaning the video heads with a cleaning cassette (optional).

Be sure to store your cassette tapes and camcorder in the proper environment.

Video heads can become dirty more easily if your cassette tapes and camcorder are stored in a dusty area. Cassette tapes should be removed from the camcorder and stored in cassette cases. Store the camcorder in a bag or other container.

Use SP (Standard) mode for important video recordings. LP (Long Play) mode lets you record 50% more video than SP (Standard) mode, but you may experience mosaic-like noise during playback depending on the tape characteristics and the usage environment.

So, for important recordings, we recommend using SP mode.

It is recommended that you use JVC brand cassette tapes.

Your camcorder is compatible with all brands of commercially available cassette tapes complying with the MiniDV standard, but JVC brand cassette tapes are designed and optimized to maximize the performance of your camcorder.

Also read “CAUTIONS” on pages 52 and 53.

Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh is a registered trademark of Apple Computer, Inc.

QuickTime is a registered trademark of Apple Computer, Inc.

Image 4
Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFFLYT1325-001A EN Wipe/Fader Effects Backlight CompensationProgram AE with Special Effects Navigation FunctionImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedBefore Using This Camcorder So, for important recordings, we recommend using SP modeCassettes marked Memory cards marked It is recommended that you use JVC brand cassette tapesBrightness Adjustment Of The Display Changing The Menu SettingsFlash Brightness Adjustment White Balance Adjustment Manual White Balance AdjustmentTo open the connector cover, pull the bottom IndexEN Getting Started End of the cover, then open itIndicators ConnectorsControls Other PartsClock Icon pg Flash Indicator pg During Video Recording OnlyDuring D.S.C. Recording Only During E-Mail Clip RecordingDuring Video Playback During D.S.C. PlaybackW T I T / M I X LProvided Accessories How To Attach/Detach The Lens RingTo attach To detachHow To Attach The Shoulder Strap Audio Extension CablePower Charging The Battery PackUsing The Battery Pack Maximum continuous recording timeOperation Mode Using AC PowerPower-Linked Operation About BatteriesGrip Adjustment Date/Time SettingsViewfinder Adjustment Brightness Adjustment Of The Display Loading/Unloading a CassetteTripod Mounting To protect valuable recordingsClose the card cover Loading/Unloading a Memory CardTo protect valuable files available only for SD Memory Card Tape Remaining Time Basic RecordingLCD Monitor And Viewfinder EN Video Recording Interface ShootingZoom Zoom OutNormal Playback Time CodeRecording From The Middle Of a Tape Video Playback ENIf using a VCR, go to . If not, go to step EN Video PlaybackShuttle Search Blank SearchButtons And Functions Installing The BatteryBeam Effective Area indoor use Playback Special Effects Slow-Motion PlaybackFrame-By-Frame Playback Playback ZoomTo cancel Interval Shooting mode C. Recording ENInterval Shooting Approximate Number of Storable ImagesNormal Playback Of Images Auto Playback Of ImagesPlayback Of Video Clips EN D.S.C. PlaybackIndex Playback Of Files Removing On-Screen DisplayViewing File Information Folder Folder name  pgResetting The File Name EN Additional Features for D.S.CTo reset the file name Mail Clip RecordingDeleting Files Protecting FilesTo Remove Protection Initialising a Memory Card To Reset The Number Of PrintsTo Print By Selecting Still Images And Number Of Prints Changing The Menu Settings Recording MenusMenus without Sub Menus Menus with Sub MenusEN Menus for Detailed Adjustment Shutter speed is being automatically adjusted, is displayedManual Enables thumbnail images to be made manually.  pg 5SEC / 15SEC / 30SEC / 60SEC pg , Flash Brightness Adjustment  pg , Brightness Adjustment Of The DisplayWhen the Menu Screen is closed after Demo Mode is turned on  pg , E-Mail Clip RecordingSound Mode and Narration Playback MenusSnapshot Flash Features for Recording ENIf C ±0A is selected Flash Brightness Adjustment Self-TimerEN Features for Recording Second RecordingMotor Drive Mode Snapshot For Video RecordingManual Focus Exposure ControlSpot Exposure Control Iris LockBacklight Compensation White Balance Adjustment To change the settingWipe Or Fader Effects To return to automatic white balanceProgram AE With Special Effects Navigation FunctionBefore continuing Variable Shutter Speed 1/250 1/4000Navigation Search To cancel Navigation search midwayTo delete thumbnail images To use this camcorder as a player EN EditingTo use this camcorder as a recorder Equipped With a DV Connector Digital DubbingConnection To a Personal Computer Using USB cable Using DV cableUsing USB cable Using DV cable It is possible to do the following thingsAudio Dubbing Insert EditingEditing EN To hear the dubbed sound during playbackButtons And Functions RM-V717U Set Remote/VCR CodeYou are now ready to try Random Assemble Editing Connect the editing cable to the Remote Pause connector Connect the editing cable to the R.A.EDIT connectorMake Connections VCR other than aboveAutomatic Editing To VCR Or manually engage the VCR’s Record-Pause modeEngage the Stop modes for the camcorder and the VCR Adjustment Of VCR/Camcorder Timing For More Accurate EditingDiagnosing VCR/Camcorder Timing Play back the dubbed sceneEN Troubleshooting PowerAdvanced features Video and D.S.C. PlaybackHPush in the memory card a few more times.  pg Other problemsViewfinder is pulled out and Priority is set to Troubleshooting Appears when no tape is loaded.  pgAppears when the tape ends during recording or playback Appears if Audio Dubbing is attempted on a tapeCleaning The Camcorder To clean the exteriorTo clean the LCD monitor To clean the lensMemory Cards EN CautionsLCD Monitor Main Unit Camcorder EN SpecificationsAC Adapter Recording Capacity 18, 2212, 13 26, 40Victor Company of Japan, Limited