28 EN ADDITIONAL FEATURES FOR D.S.C.
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing. You can select one of the 2 print information settings for images stored in the memory card: “To Print All Still Images (One Print For Each)” or “To Print By Selecting Still Images And Number Of Prints”.
NOTES:
●If you load a memory card already set as shown below in a printer compatible with DPOF, it will make prints of the selected still images automatically.
●To print images recorded on a tape, first dub them to a memory card. ( pg. 26)
To Print All Still Images (One Print For Each)
1 Display the playback screen of normal images. ( pg. 24)
2 Press MENU. The Menu Screen appears.
3 Press r or t to select “DPOF”, |
|
|
|
|
|
and press SET. The Sub Menu |
| MENU | |||
appears. | DPOF |
| CURRENT | ||
4 Press r or t to select “ALL 1”, |
|
| ALL 1 |
| |
|
| RESET |
| ||
|
|
|
|
| |
and press SET. The DPOF screen |
|
| RETURN | ||
appears. |
|
|
|
|
|
5 Press r or t to select |
| DPOF | |||
“EXECUTE”, and press SET. The |
| ||||
|
|
|
|
| |
normal playback screen appears. |
|
|
|
|
|
● To cancel selection, select |
| ALL 1 ? | |||
“RETURN”. |
|
|
|
|
|
| EXECUTE |
|
| ||
|
|
| |||
|
| RETURN |
| ||
To Print By Selecting Still Images And Number Of Prints
1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.
2 Press r or t to select
“CURRENT”, and press SET. The | DPOF |
6 Press r or t to select
“RETURN”, and press SET. The | DPOF |
| |
“SAVE?” appears. |
|
● If you did not change any settings in | SAVE? |
step 3 through 5, the Menu Screen |
|
EXECUTE | |
reappears. | CANCEL |
7 Press r or t to select
“EXECUTE” to save the setting you have just made, and press SET.
●To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.
2 Press r or t to select “RESET”, and press SET. The DPOF screen appears.
3 Press r or t to select “EXECUTE”, and press SET. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
Initialising A Memory Card
You can initialise a memory card any time.
After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
1
2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3 Press MENU. The Menu Screen appears.
4 Press r or t to select | FORMAT | |
“FORMAT”, and press SET. The | ERASE AL L | |
FORMAT screen appears. | ||
EX I ST I NG DATA? |
5 Press r or t to select
“EXECUTE”, and press SET. The EXECUTE
DPOF screen appears. |
memory card is initialised.
RETURN
3 Press w or e to select the | SHEETS | |||
|
|
| ||
desired file. | 0 0 |
| ||
RETURN | ||||
4 Press r or t to select the | ||||
|
|
| ||
number indication (00), and press SET. |
|
|
| |
5 Select the number of prints by | DPOF | |||
pressing r to increase the | ||||
|
|
| ||
number, or t to decrease the |
|
|
| |
number, and press SET. | SHEETS | |||
● Repeat steps 3 through 5 for the |
|
|
| |
0 5 |
| |||
desired number of prints. |
|
|
| |
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
●When initialisation is finished, “NO
IMAGES STORED” or “NO
●To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted, initialise it.