Panasonic AW-RP400N Iris AUTO/MANU/LOCK button, SD Card slot, Iris dial, Zoom lever/FOCUS dial

Page 24

Pan/Tilt Control Panel AW-RP400

Parts and their function

7IRIS [AUTO/MANU/LOCK] button

Use this to select the method for adjusting the lens iris of the cameras in the currently selected pan/tilt head system.

Each time it is pressed, the setting is switched in the sequence of AUTO, MANU and LOCK.

AUTO: The cameras automatically adjust the lens iris in accordance with the light quantity, and the IRIS button lamp lights.

MANU: The lens iris is adjusted manually using the IRIS dial. At this setting, the IRIS button lamp is off.

LOCK: The lens iris is locked at the manually adjusted setting. It does not move even when the (9) IRIS dial is turned. In this status, the IRIS button lamp flashes slowly.

While MANU or LOCK is selected, the IRIS button lamp starts flashing quickly when the IRIS dial is turned: this indicates that the lens iris cannot be controlled even when the (9) IRIS dial is turned.

The IRIS button on the control panel does not work when the WV-CB700A remote control box is connected to the control panel. Select AUTO or MANU using the IRIS [AUTO/MAN] button on the WV-CB700A.

8SD CARD slot

This slot is where the SD memory cards are inserted. The pan/tilt head and camera setting can be stored on these cards.

9IRIS dial

The lens iris can be adjusted by turning this dial while the (7) IRIS [AUTO/MANU/LOCK] button is set to MANU. The iris is opened by turning the dial clockwise and stopped down by turning it counterclockwise.

The IRIS dial on the control panel does not work when the WV-CB700A remote control box is connected to the control panel. Adjust the iris using the IRIS control on the WV-CB700A.

:ZOOM lever/FOCUS dial

Use the ZOOM lever to adjust the lens zoom. The TELE (telephoto) and WIDE (wide angle) settings are established by the direction in which the lever is tilted; the zooming speed is adjusted by the angle to which the lever is tilted.

The lens is focused using the FOCUS dial on the top of the lever.

;PAN POSITION indicator

Sixteen LEDs are used to display the position of the pan/tilt head in the horizontal rotational direction for 200 degrees to the left or right.

When the pan/tilt head is rotated to the right by more than 180 degrees up to 200 degrees, the 180-degree LED flashes, and LEDs on its left light.

Conversely, when the pan/tilt head is rotated to the left by more than 180 degrees up to 200 degrees, the 180- degree LED flashes, and LEDs on its right light.

0o

90° to the left

 

 

 

90° to the right

 

 

180° to the left or right

<IRIS indicator

The position of the lens iris in the currently selected

pan/tilt head system is indicated by a 6-step display (CLOSE > OPEN).

=ZOOM indicator

The position of the lens zoom in the currently selected

pan/tilt head system is indicated by a 6-step display (WIDE > TELE).

>FOCUS indicator

The position of the lens focus in the currently selected

pan/tilt head system is indicated by a 6-step display (NEAR > FAR).

?OPTION switches [A to H]

The “NOT USE”, “DEF”, “WIP”, “HEATER/FAN”, “LAMP”, “OPTION”, “ND”, “EXT” and “AF” functions can be allocated to OPTION switches A to H by menu settings.

@HOME button

Press this to move the pan/tilt head and roll unit to the home position.

ALCD CONTRAST control

Use this to adjust the contrast of the LCD panel.

24

Image 24
Contents AW-RL400 AW-PH400 AW-RP400 AW-RC400 AW-RL400Safety precautions FCC NoteImportant Safety Instructions Contents Operating precautions ≥ Do not use the units outdoors ≥ Maintenance≥ Handle the units carefully Accessories Precautions for useIntroduction Installation precautions Parts and their function Rotary head connector panel Pedestal connector panel Pedestal Power ON/OFF switchBottom panel Prompter connector Tally lamp accessoryND/EXT connector ND/EXT @ SDI in connector SDILens I/F 2 connector Lens I/F Option connector OptionConnector Y ConnectorSDI connector SDI L in connector G/LFor a stand-alone installation For installation on the ceiling$ Assembling the pan/tilt head Attaching the camera mounting baseMounting the tally lamp $ Setting the mounting direction switch For stand-alone installationFor installation on the ceiling $ Setting the PCB switches $ Installing the pan/tilt head $ Mounting the camera $ Attaching the wire ≥ Camera AW-E750≥ Camera AW-E650, AW-E350 Replacing the consumable parts Specifications Power consumptionSupply voltage Memo Zoom switch Plug D-SUB 15-pin for tally/INCOM system Rack-mounting adaptors Mounting screws M4!8 mm$ Front panel PAN Position indicator Iris indicator= Zoom indicator Focus indicatorPreset Memory selection buttons 1 to PAN/TILT lever/ROTATION control switchMemory button LCD panelEXT Cont IN/OUT connectors Camera Control in from RCB P1 to P5 connectorsTALLY/INCOM connector $ Rear panelRemote connector Control OUT to PAN/TILT Head P1 to P5 connectorsMoni SEL OUT connector Camera Control in from ROP connectorMenu settings $ Operation method$ List of menu items and settings Menu item Setting Description Initial valueTilt Range setting 190/300 degrees Speed with Zoom POS. setting OFF/1/2/3Preset Speed setting 1 to Iris Control setting BOTH/RP400/CB400Option Switch a to H settings Memory Length setting 60s/120s/300s/600sControl Select Mode setting INTERLOCK/UN-INTERLOCK Buzzer setting OFF/ONAuto RUN setting Start No., END No., Interval SD Card settingHow to mount the AW-RP400 in a rack How to change the position of the connector panel Before changing the position, turn off the powerHow to replace the zoom switch Before replacing the zoom switch, turn off the powerSecure the zoom switch using the four screws Replacing the consumable parts Supply voltage DC 12.0 Power consumption Approx W Cable Compensation Unit AW-RC400 Front panel Power LED Power switchCable length setting switches 0 to SHORT/LONG selector switchMONITOR1, 2 connectors BAC adaptor storage space Video in connectors 1 to= Pr/C in connectors 1 to Pb in connectors 1 toHow to mount the AW-RC400 in a rack Power consumption Approx W Ambient operating temperaturePan/tilt head connecting cable Pan/tilt head connector Rotary ring Camera mounting screw U1/4-20UNCCamera mounting plate a B Roll unit anchoring screw holesInstallation When the AW-E750, AW-E650 or AW-E350 is used as the camera When the AW-E655 is used as the cameraCamera mounting plate’s screws Supply voltage DC 24 Power consumption Approx W Pan/tilt head connectorPerformance Connections Zoom/focus Control Example of system configuration MONITOR1 MONITOR2Operating procedures $ Turning on the power$ Providing cable compensation for the cameras $ Genlock adjustments for the respective cameras $ Video adjustments for the cameras$ Tracing memory settings Setting the recording time and number of memoriesPlaying the tracing memory data $ Setting the preset memory data Registering the preset memory dataChanging the tracing memory data Erasing the tracing memory dataPlaying the preset memory data Cable specifications Cable specifications When an RD lens made by Fujinon is used Page Page Page Panasonic Broadcast & Television Systems Company