Panasonic AW-PH400P, AW-RP400N, AW-RC400N manual Specifications, Supply voltage, Power consumption

Indoor Pan/Tilt Head AW-PH400

Specifications

Supply voltage:	AC 120 V, 60 Hz
Power consumption:	145 W
1 indicates safety information.
Genlock input:	BNC
	Black burst or composite video signal
Prompter input
(PROMPTER IN):	BNC
	Through output to PROMPTER connector
Prompter output
(PROMPTER OUT):	D-SUB 15-pin
Camera video output
VIDEO:	BNC, 75-ohm output
Y:	BNC, 75-ohm output
Pr/C:	BNC, 75-ohm output
Pb:	BNC, 75-ohm output
SDI:	BNC
Camera, pan/tilt head control: RJ45, RS-485, pan/tilt head control signal output
RP/IP	Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
	max. 500 meters
Functions/performance:	Maximum load-bearing capacity: 17.6 lbs (8 kg)
	Tilt range: 300 degrees (approx. ±150 degrees)

The tilt range is limited to 190 degrees by the initial setting of the AW-RP400. To move beyond 190 degrees, change the AW-RP400 setting.

The tilt range is subject to restrictions depending on the cable and lens of camera to be mounted on pan/tilt head.

	Pan range: 400 degrees (approx. ±200 degrees)
	Maximum operating speed: 90 degrees/sec.
	(Maximum operating speed with prompter mounted: 30 degrees/sec.)
	Repeatability: ±30”
	Noise level: Less than NC30 (at less than 30 degrees/sec.)
Ambient operating temperature: 32°F to 113°F (0°C to +45°C)
Storage temperature:	–4°F to 140°F (–20°C to +60°C)
Ambient operating humidity:	30% to 90% (no condensation)
Dimensions (W!H!D):	12-3/8”!21”!7-3/8” (315!534!188 mm)
Weight:	Approx. 22.5 lbs (10.2 kg)
Finish:	AV ivory paint (color resembling Munsell 7.9Y6.8/0.8)

Weight and Dimensions indicated above are approximate.

Specifications are subject to change without notice.

20