Panasonic WV-NS202A About the playback, Number of the listed images, REV Play button

Page 17

Playback of images saved on the SD memory card

When clicking a time and date listed on the log list window, the "live" page will turn to the "playback" page.

When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed.

Important:

Refresh interval of images may become slow during playback or download.

When many images are saved on the SD memory card, it may take time to display images on the "playback" page.

Even when the size of the images saved on the SD memory card is QVGA size, the images will be played in VGA size on the "playback" page.

Therefore, images may look coarse on the "playback" window.

When playing images by selecting an FTP error log on the log list, images may not be played in order of images recorded on the SD memory card if they have been recorded on the SD memory card with selected value for the "Interval" setting on the [FTP] tab (page 73) is "1 min" or less.

Before removing the SD memory card, make sure that "Not use" is selected for "SD memory card" (page 27).

Playback/reverse playback will be performed without being affected by the "Frame rate" settings of images recorded on the SD memory card.

About the "playback" page

[Number of the listed images]

When clicking a time and date listed on the log list win- dow, total number of images associated with the clicked time and date, and the number of the currently dis- played image will be displayed.

Note:

Enter the desired number of image and press the [Enter] key on the keyboard. The image of the desig- nated number will be displayed.

[PLAY] button

When this button is clicked, images will be played in sequential order.

[REV PLAY] button

Images will be played in reverse sequential order.

[PAUSE] button

Playback will be paused when this button is clicked dur- ing playback. Playback will resume when this button is clicked during pausing.

17

Image 17
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer softwareMonitor images from a single camera Monitor images on a PCStep Refresh interval MPEG-4About the Live SD button manual SD recording button *2 1AUTO Mode *2List button *1 Zoom buttons *22Control pad/buttons *2 4PRESET *23BRIGHTNESS buttons *2 5Camera titleMic input button *3 @ SD recording status indicator@ Audio output button *3 @2Main area *2Monitor images from multiple cameras Record images on the SD memory card manually Alarm type Action at an alarm occurrenceAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server SD memory card Use Save images on the SD memory cardDisplay the log list TOP button Number of the listed logsPrev Page button Next Page buttonClose button Download buttonNumber of the listed images About the playbackPlay button REV Play buttonNext Image button Stop buttonPrev Image button FF/REW buttonsEquipped security functions Access restrictions by changing the Http portAbout the network security of the camera How to display the setup menu How to operate the setup menu About the setup menu window Schedule setup button Network setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDefault Real time Alarm status update modeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size Qvga Image capture size VGAAlarm Configure the settings relating to the logs LOGFTP error ManualOFF Save logs Card LOG tab SD memory card tab Logs and associated imagesSD memory Save trigger Overwrite Save logs Card SD memoryDefault VGA Image quality Jpeg setupDefault 5 fps Refresh interval JpegDefault Normal Refresh interval MPEG-4 MPEG-4 setupDefault 3 sec Transmission type MPEG-4 transmissionDefault Multicast address Default Unicast port2 AudioDefault Multicast TTL Available value 1 DefaultDefault 1 min Image Hold Default OFF Camera title on screen 0-9, A-ZCamera title on screen Home positionTilt Angle Upside-downPan·Tilt degree/Zoom ratio display Preset Position Image AdjustAuto Pan Privacy ZoneAbout SUPER-D 3 Super Dynamic function Super DynamicDefault on High Sensitivity up Default AutoSimple Black & white mode Default ATW1Red Gain Default High Chroma gain levelBlue Gain DNR Digital Noise ReductionSet mask areas Edit the settings of the registered preset position Register the preset positionPosition No Auto pan PositionPrivacy zone Zone settingMode Zone selectConfigure the settings relating to audio Audio Default Middle Audio output interval PC to Camera Audio output volume PC to CameraAuthentication Audio output port PC to CameraNumber of characters for the IP address 1 Configures the multi-screen settings Multi-screen setupIP address Alarm setup Configure the alarm settings Alarm setupConfigure the settings relating to the alarm Alarm Camera motion on alarm Command alarm Alarm image setup Configure the settings relating to the alarm imageAUX name Configure the settings relating to the alarm out terminalAlarm output terminal setup Set the VMD areas VMD area Status Default OFF Detection sensitivitySet the VMD areas for each preset position Default Middle Delete the VMD area set for the designated preset positionMail notification setup Panasonic alarm protocol Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol setup Default OFF User name User authenticationPassword Retype password Number of characters for the password 4 32 charDefault OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault Passive FTP server address Number of characters for the FTP server addressNetwork setup Configuring the network settings Network setupConfigure the network settings Network Unavailable IP addresses for the default gate- way Default gatewayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Access interval Configure the settings relating to Ddns DdnsDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 1Interval Schedule setupHow to configure the schedule settings How to delete the set schedule How to set the schedules Check the system log System log Maintenance of the camera MaintenanceError message How to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the camera Initialization Initialize setup data and Html dataInitialize Html data RestartError indications relating to FTP Error indications relating to SmtpAbout the displayed system log Category Indication DescriptionError indications relating to login Error indications relating to DdnsError indications relating to NTP Cause/solution TroubleshootingSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages FTP Directory structure of drive BGroup WAN IP address Protocol LAN IP address LAN port Setting example of the routerGroup LAN IP address LAN port WAN IP address Protocol N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.