Panasonic WV-NS202A operating instructions Configure the settings of the servers Server setup

Page 65

Configure the settings of the servers [Server setup]

The settings relating to the mail server and the FTP server can be configured on this page. The "Server setup" page has 2 tabs; the [Mail] tab and the [FTP] tab.

Configure the settings relating to the mail server [Mail]

Click the [Mail] tab on the "Server setup" page. (pages 20 and 21: How to display/operate the setup menu) The settings relating to the mail server used to send the alarm mail can be configured on this page.

[SMTP server address]*

Enter the IP address or the host name of the SMTP server used to send e-mails.

Number of characters for the SMTP server address:

1 - 128 characters

[POP server address]*

When "POP before SMTP" is selected for "Authentica- tion", enter the IP address or the host name of the POP server.

Number of characters for the POP server address:

1 - 128 characters

* Important:

When entering the host name for "SMTP server address/POP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network setup" page. (page 68)

[Authentication]

Select the authentication method to send e-mails from the following.

None: It is not necessary to clear any authentication to send e-mails.

POP before SMTP: It is necessary to first clear the POP server authentication to use the SMTP server to send e-mails.

SMTP: It is necessary to clear the SMTP server authen- tication to send e-mails.

Default: None

Note:

When you don’t know the authentication method to send e-mails, refer to the network administrator.

[User name]

Enter the user name to access the server.

Number of characters for the user name: 1 - 32 char-

acters

[Password]

Enter the password to access the server.

Number of characters for the password: 0 - 32 char-

acters

[Sender mail address]

Enter the mail address of a sender.

The entered mail address will be displayed in the "From" (sender) line of the sent mails.

Number of characters for the sender mail address:

3 - 128 characters

65

Image 65
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer softwareMonitor images from a single camera Monitor images on a PCStep Refresh interval MPEG-4About the Live SD button manual SD recording button *2 1AUTO Mode *2List button *1 Zoom buttons *22Control pad/buttons *2 4PRESET *23BRIGHTNESS buttons *2 5Camera titleMic input button *3 @ SD recording status indicator@ Audio output button *3 @2Main area *2Monitor images from multiple cameras Record images on the SD memory card manually Alarm type Action at an alarm occurrenceAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server SD memory card Use Save images on the SD memory cardDisplay the log list TOP button Number of the listed logsPrev Page button Next Page buttonClose button Download buttonNumber of the listed images About the playbackPlay button REV Play buttonNext Image button Stop buttonPrev Image button FF/REW buttonsEquipped security functions Access restrictions by changing the Http portAbout the network security of the camera How to display the setup menu How to operate the setup menu About the setup menu window Schedule setup button Network setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDefault Real time Alarm status update modeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size Qvga Image capture size VGAAlarm Configure the settings relating to the logs LOGFTP error ManualOFF Save logs Card LOG tab SD memory card tab Logs and associated imagesSD memory Save trigger Overwrite Save logs Card SD memoryDefault VGA Image quality Jpeg setupDefault 5 fps Refresh interval JpegDefault Normal Refresh interval MPEG-4 MPEG-4 setupDefault 3 sec Transmission type MPEG-4 transmissionDefault Multicast address Default Unicast port2 AudioDefault Multicast TTL Available value 1 DefaultDefault 1 min Image Hold Default OFF Camera title on screen 0-9, A-ZCamera title on screen Home positionTilt Angle Upside-downPan·Tilt degree/Zoom ratio display Preset Position Image AdjustAuto Pan Privacy ZoneAbout SUPER-D 3 Super Dynamic function Super DynamicDefault on High Sensitivity up Default AutoSimple Black & white mode Default ATW1Red Gain Default High Chroma gain levelBlue Gain DNR Digital Noise ReductionSet mask areas Edit the settings of the registered preset position Register the preset positionPosition No Auto pan PositionPrivacy zone Zone settingMode Zone selectConfigure the settings relating to audio Audio Default Middle Audio output interval PC to Camera Audio output volume PC to CameraAuthentication Audio output port PC to CameraNumber of characters for the IP address 1 Configures the multi-screen settings Multi-screen setupIP address Alarm setup Configure the alarm settings Alarm setupConfigure the settings relating to the alarm Alarm Camera motion on alarm Command alarm Alarm image setup Configure the settings relating to the alarm imageAUX name Configure the settings relating to the alarm out terminalAlarm output terminal setup Set the VMD areas VMD area Status Default OFF Detection sensitivitySet the VMD areas for each preset position Default Middle Delete the VMD area set for the designated preset positionMail notification setup Panasonic alarm protocol Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol setup Default OFF User name User authenticationPassword Retype password Number of characters for the password 4 32 charDefault OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault Passive FTP server address Number of characters for the FTP server addressNetwork setup Configuring the network settings Network setupConfigure the network settings Network Unavailable IP addresses for the default gate- way Default gatewayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Access interval Configure the settings relating to Ddns DdnsDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 1Interval Schedule setupHow to configure the schedule settings How to delete the set schedule How to set the schedules Check the system log System log Maintenance of the camera MaintenanceError message How to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the camera Initialization Initialize setup data and Html dataInitialize Html data RestartError indications relating to FTP Error indications relating to SmtpAbout the displayed system log Category Indication DescriptionError indications relating to login Error indications relating to DdnsError indications relating to NTP Cause/solution TroubleshootingSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages FTP Directory structure of drive BGroup WAN IP address Protocol LAN IP address LAN port Setting example of the routerGroup LAN IP address LAN port WAN IP address Protocol N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.