Configure the settings relating to the FTP periodic transmission [FTP]
Click the [FTP] tab on the "Network setup" page. (☞ pages 20 and 21: How to display/operate the setup menu)
■FTP periodic transmission
The settings relating to the periodic transmission of images to an FTP server can be configured in this section. To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance. (☞ page 66)
Refer to page 73 for descriptions of how to configure schedules of image transmission.
Important:
•Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat- ed interval or period.
•When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, the FTP periodic transmission function will become unavailable.
•When "ON" is selected for both the alarm image transmission function and the FTP periodic transmission func- tion, the alarm image transmission function will be given priority over the FTP periodic transmission function. For this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.
Note:
When "FTP error" is selected for "Save trigger" on the [SD memory card] tab, images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD memory card. (☞ page 27)
[To FTP setup]
When "To FTP setup" is clicked, the [FTP] tab of the "Server setup" page will be displayed. (☞ page 66)
[FTP periodic transmission]
Select "ON" or "OFF" to determine whether or not to transmit images using the FTP periodic transmission function.
When "ON" is selected, it is necessary to configure the settings of the FTP server. (☞ page 66)
Default: OFF
[Directory]
Enter the directory name where the images are to be saved.
For example, enter "/img" to designate the directory "img" under the root directory of the FTP server.
Number of characters for the directory name: 1 - 256
characters Default: None (blank)
[File name]
Enter the file name (name of the image file to be trans- mitted) and select the naming option from the following. With time and date: File name will be ["Entered file
name" + "Time and date (year/month/day/hour/ minute/second)" + "Serial number (starting from 00)"].
Without time and date: File name will be the charac- ters entered for "File name" only. When "Without time and date" is selected, the file will be overwritten each time a file is newly transmitted.
Number of characters for the file name: 1 - 32 char-
acters
Default: None (blank)
72