Panasonic WV-NS202A Mask area, Shutter, Default Auto, Default on High Sensitivity up

Page 42

[Mask area]

When "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking the brighter area.

Refer to page 44 for descriptions of how to mask.

[Shutter]

Select the shutter speed from the following.

AUTO: Provides clearer images of bright objects out- doors since the shutter speed is adjusted automati- cally. Flickering caused by fluorescent lamps can also be compensated.

OFF: Fixed at 1/60 sec

1/100: Recommended when flickering caused by fluo- rescent lamp appears frequently.

Default: AUTO

Depending on the environment, flickering may not be compensated even when selecting "AUTO". When flick- ers appear frequently, set the shutter speed to "1/100".

[AGC]

Select a method of gain adjustment from the following. ON (HIGH)/ON (MID)/ON (LOW): When the luminance

of the subject becomes darker, gain will be automati- cally incremented and screen will become brighter. "HIGH", "MID" and "LOW" are indications of gain level.

OFF: Images will be captured with the fixed gain level.

Default: ON (HIGH)

[Sensitivity up]

The electronic sensitivity enhancement (sensitivity up) can be carried out by adjusting the storage time of CCD. The following are available for the sensitivity up. OFF/x2 AUTO/x4 AUTO/x6 AUTO/x10 AUTO/

x16 AUTO/x32 AUTO Default: OFF

Note:

When "x32 AUTO" is selected, for example, sensitiv- ity will automatically be increased up to x32.

Important:

When the sensitivity up function is active, frame rate may become lower. Noise or white dots (blemishes) may sometimes appear.

[Simple Black & white mode]

Select "AUTO" or "OFF" for the simple black and white mode.

OFF: The camera will always be in the color mode.

AUTO: The camera will automatically be in the color mode or in the black and white mode depending on brightness (intensity of illumination).

When taking images under dark illumination, the camera will automatically become in the black and white mode.

When taking images under bright illumination, the camera will automatically become in the color mode.

Default: OFF

Approximate indication of brightness (intensity of illumination) that makes the camera to switch from the color mode to the black and white mode: Approx. 3 lx (When "ON" is selected for "AGC")

Time to be taken to switch from the color mode to the black and white mode: Approx.5 seconds

[White balance]

Select a method of white balance adjustment from the following.

White color can be adjusted by "Red Gain" and "Blue Gain".

ATW1: Auto tracing white balance mode

The camera will constantly check the color tempera- ture of the light source and adjust the white balance automatically.

Operating color temperature range is approx.

2 700 K – 6 000 K.

ATW2: Auto tracing white balance under a sodium lamp. The camera will adjust the white balance auto- matically under a sodium lamp.

Operating color temperature range is approx.

2 000 K – 6 000 K.

AWC: Auto white balance control mode

Suitable for shooting where the light source is fixed and the light intensity is constant. Operating color temperature range is approx. 2 000 K – 10 000 K.

Default: ATW1

Notes:

Under the following conditions, color may not be faithfully processed. In these cases, select "AWC".

When shooting a subject whose major part is a thick color

When shooting blue sky or sun at sunset

When shooting a subject whose luminance is too low

42

Image 42
Contents Network Operating Instructions Contents Trademarks and registered trademarks PrefaceAbout these operating instructions Viewer softwareStep Monitor images on a PCMonitor images from a single camera Refresh interval MPEG-4About the Live List button *1 1AUTO Mode *2SD button manual SD recording button *2 Zoom buttons *23BRIGHTNESS buttons *2 4PRESET *22Control pad/buttons *2 5Camera title@ Audio output button *3 @ SD recording status indicatorMic input button *3 @2Main area *2Monitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Action at an alarm occurrenceAlarm type Notify of alarm occurrences by e-mailTransmit images onto an FTP server Save images on the SD memory card SD memory card UseDisplay the log list Prev Page button Number of the listed logsTOP button Next Page buttonDownload button Close buttonPlay button About the playbackNumber of the listed images REV Play buttonPrev Image button Stop buttonNext Image button FF/REW buttonsAccess restrictions by changing the Http port About the network security of the cameraEquipped security functions How to display the setup menu How to operate the setup menu About the setup menu window Maintenance button Network setup buttonSchedule setup button 3SetupConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status port Alarm status update modeDefault Real time Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size VGA Image capture size QvgaFTP error Configure the settings relating to the logs LOGAlarm ManualOFF LOG tab SD memory card tab Logs and associated images SD memory Save triggerSave logs Card SD memory Overwrite Save logs CardDefault 5 fps Jpeg setupDefault VGA Image quality Refresh interval JpegDefault 3 sec Transmission type MPEG-4 setupDefault Normal Refresh interval MPEG-4 MPEG-4 transmissionDefault Multicast TTL Default Unicast port2 AudioDefault Multicast address Available value 1 DefaultCamera title on screen Default OFF Camera title on screen 0-9, A-ZDefault 1 min Image Hold Home positionUpside-down Pan·Tilt degree/Zoom ratio displayTilt Angle Auto Pan Image AdjustPreset Position Privacy ZoneSuper Dynamic About SUPER-D 3 Super Dynamic functionSimple Black & white mode Default AutoDefault on High Sensitivity up Default ATW1Blue Gain Default High Chroma gain levelRed Gain DNR Digital Noise ReductionSet mask areas Register the preset position Edit the settings of the registered preset positionPosition No Position Auto panMode Zone settingPrivacy zone Zone selectConfigure the settings relating to audio Audio Authentication Audio output volume PC to CameraDefault Middle Audio output interval PC to Camera Audio output port PC to CameraConfigures the multi-screen settings Multi-screen setup IP addressNumber of characters for the IP address 1 Configure the alarm settings Alarm setup Configure the settings relating to the alarm AlarmAlarm setup Camera motion on alarm Command alarm Configure the settings relating to the alarm image Alarm image setupConfigure the settings relating to the alarm out terminal Alarm output terminal setupAUX name Set the VMD areas VMD area Default OFF Detection sensitivity StatusSet the VMD areas for each preset position Delete the VMD area set for the designated preset position Default MiddleMail notification setup Configure the settings relating to Panasonic alarm protocol Panasonic alarm protocol setupPanasonic alarm protocol Password Retype password User authenticationDefault OFF User name Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailDefault Passive FTP server address Configure the settings relating to the FTP server FTPFTP mode Number of characters for the FTP server addressConfiguring the network settings Network setup Configure the network settings NetworkNetwork setup Available port number 1 Default Port numbers already in use Default gatewayUnavailable IP addresses for the default gate- way Default Manual Primary DNS, Secondary DNSWAN Default OFF Host name Configure the settings relating to Ddns DdnsAccess interval Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 1Schedule setup How to configure the schedule settingsInterval How to delete the set schedule How to set the schedules Maintenance of the camera Maintenance Error messageCheck the system log System log Upgrade the firmware Upgrade How to upgrade the firmwareInitialize Html data Initialize setup data and Html dataInitialize/restart the camera Initialization RestartAbout the displayed system log Error indications relating to SmtpError indications relating to FTP Category Indication DescriptionError indications relating to Ddns Error indications relating to NTPError indications relating to login Troubleshooting Cause/solutionSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages Directory structure of drive B FTPSetting example of the router Group LAN IP address LAN port WAN IP address ProtocolGroup WAN IP address Protocol LAN IP address LAN port N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.