Panasonic WV-NS202A operating instructions Configure the settings relating to audio Audio

Page 49

ZOOM buttons

[CLOSE] button

FOCUS buttons

Click this button to close the "Privacy zone" setup menu.

BRIGHTNESS buttons

 

Control pad/buttons

 

Refer to pages 6 and 7 for descriptions of how to oper-

 

ate these buttons/pad.

 

Configure the settings relating to audio [Audio]

Click the [Audio] tab on the "Camera setup" page. (pages 20 and 21: How to display/operate the setup menu) The settings relating to audio can be configured on this page.

[Audio mode]

Select the communication mode used for audio data transmission/reception between the camera and the PC from the following.

OFF: Does not receive/transmit audio between the cam- era and the PC. Therefore, the settings and controls relating to audio will be invalidated.

Mic input: The PC receives audio data from the cam- era. Audio can be heard with images on the PC. Images and audio will not be synchronized.

Audio output: Audio data from the PC will be transmit- ted to the camera. Audio can be heard from the speaker connected to the camera.

Interactive: The PC receives audio data from the cam-

era. Audio can be heard with images on the PC. Audio transmitted from the PC to the camera can also be heard from the speaker connected to the camera (Transceiver type). However, audio data cannot simultaneously be transmitted and received.

Default: OFF

Note:

When "Multicast" is selected for "Transmission type" of "MPEG-4 setup" in the "MPEG-4 setup" section of the [JPEG/MPEG-4] tab of the "Camera setup" page (page 36), it is impossible to carry out the "Audio output" operation while monitoring MPEG-4 image. To carry out the "Audio output" operation, click the [JPEG] button.

[Audio bit rate]

Select "16 kbps" or "32 kbps" for the audio bit rate used to transmit/receive audio data.

Default: 32 kbps

Note:

When selecting a smaller value for "Total bit rate" (page 68) while putting a priority on the JPEG/ MPEG-4 image transmission, select "16 kbps" for "Audio bit rate".

[Mic input volume (Camera to PC)]

Select a volume level on the PC to hear audio transmit- ted from the camera.

Low/Middle/High

Default: Middle

[Mic input interval (Camera to PC)]

Select an interval for audio reception from the following. 20 msec/40 msec/80 msec/160 msec

Default: 40 msec

Note:

When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected, audio interruption may be diminished even though the delay time will be longer.

Select the interval according to the network environ- ment.

49

Image 49
Contents Network Operating Instructions Contents About these operating instructions PrefaceTrademarks and registered trademarks Viewer softwareMonitor images from a single camera Monitor images on a PCStep Refresh interval MPEG-4About the Live SD button manual SD recording button *2 1AUTO Mode *2List button *1 Zoom buttons *22Control pad/buttons *2 4PRESET *23BRIGHTNESS buttons *2 5Camera titleMic input button *3 @ SD recording status indicator@ Audio output button *3 @2Main area *2Monitor images from multiple cameras Record images on the SD memory card manually Alarm type Action at an alarm occurrenceAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server SD memory card Use Save images on the SD memory cardDisplay the log list TOP button Number of the listed logsPrev Page button Next Page buttonClose button Download buttonNumber of the listed images About the playbackPlay button REV Play buttonNext Image button Stop buttonPrev Image button FF/REW buttonsAbout the network security of the camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the setup menu window Schedule setup button Network setup buttonMaintenance button 3SetupConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDefault Real time Alarm status update modeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size Qvga Image capture size VGAAlarm Configure the settings relating to the logs LOGFTP error ManualOFF SD memory Save trigger LOG tab SD memory card tab Logs and associated imagesSave logs Card Overwrite Save logs Card SD memoryDefault VGA Image quality Jpeg setupDefault 5 fps Refresh interval JpegDefault Normal Refresh interval MPEG-4 MPEG-4 setupDefault 3 sec Transmission type MPEG-4 transmissionDefault Multicast address Default Unicast port2 AudioDefault Multicast TTL Available value 1 DefaultDefault 1 min Image Hold Default OFF Camera title on screen 0-9, A-ZCamera title on screen Home positionPan·Tilt degree/Zoom ratio display Upside-downTilt Angle Preset Position Image AdjustAuto Pan Privacy ZoneAbout SUPER-D 3 Super Dynamic function Super DynamicDefault on High Sensitivity up Default AutoSimple Black & white mode Default ATW1Red Gain Default High Chroma gain levelBlue Gain DNR Digital Noise ReductionSet mask areas Edit the settings of the registered preset position Register the preset positionPosition No Auto pan PositionPrivacy zone Zone settingMode Zone selectConfigure the settings relating to audio Audio Default Middle Audio output interval PC to Camera Audio output volume PC to CameraAuthentication Audio output port PC to CameraIP address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Configure the settings relating to the alarm Alarm Configure the alarm settings Alarm setupAlarm setup Camera motion on alarm Command alarm Alarm image setup Configure the settings relating to the alarm imageAlarm output terminal setup Configure the settings relating to the alarm out terminalAUX name Set the VMD areas VMD area Status Default OFF Detection sensitivitySet the VMD areas for each preset position Default Middle Delete the VMD area set for the designated preset positionMail notification setup Panasonic alarm protocol setup Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol Default OFF User name User authenticationPassword Retype password Number of characters for the password 4 32 charDefault OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault Passive FTP server address Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupNetwork setup Unavailable IP addresses for the default gate- way Default gatewayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Access interval Configure the settings relating to Ddns DdnsDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp FTP periodic transmission Default OFF DirectoryFTP periodic transmission Number of characters for the directory name 1How to configure the schedule settings Schedule setupInterval How to delete the set schedule How to set the schedules Error message Maintenance of the camera MaintenanceCheck the system log System log How to upgrade the firmware Upgrade the firmware UpgradeInitialize/restart the camera Initialization Initialize setup data and Html dataInitialize Html data RestartError indications relating to FTP Error indications relating to SmtpAbout the displayed system log Category Indication DescriptionError indications relating to NTP Error indications relating to DdnsError indications relating to login Cause/solution TroubleshootingSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages FTP Directory structure of drive BGroup LAN IP address LAN port WAN IP address Protocol Setting example of the routerGroup WAN IP address Protocol LAN IP address LAN port N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.