Panasonic WV-NS202A Monitor images on a PC, Monitor images from a single camera, Step

Page 4

Monitor images on a PC

The following are descriptions of how to monitor images from the camera on a PC.

Monitor images from a single camera

Step 1

Start up the web browser.

Step 2

Enter the IP address designated using the Panasonic IP setup software in the address box of the browser. (Example: http://192.168.0.10)

Important:

When the HTTP port number is changed from "80", enter "http://IP address of the camera + : (colon) + port number" in the address box of the browser, for example, "http://192.168.0.11:8080".

When the PC is in a local network, configure the web browser to bypass the proxy server for the local address.

Step 3

Press the [Enter] key on the keyboard.

The "Live" page will be displayed.

Important:

When displaying multiple MPEG-4 images on a PC, images may not be displayed depending on the per- formance of the PC.

When "ON" is selected for "VMD alarm" (page 52), the frame rate of MPEG-4 and JPEG (QVGA) images will become 15 fps at a maximum.

Notes:

When "ON" is selected for "User Authentication", the authentication window will be displayed before dis- playing live images for the user name and password entries. The default user name and password are as follows.

User name: admin

Password: 12345

When accessing the camera without changing the default password, the pop-up window saying that it is recommended to change the password will be dis- played.

To enhance the security, change the password for the user "admin". It is recommended to change this password periodically.

When "Unicast port (AUTO)" or "Unicast (MANUAL)" is selected for "Transmission type" of "MPEG-4 setup", up to 8 users can access the camera concur- rently regardless of the image type (JPEG/MPEG-4) that the current access users are monitoring. Depending on the set values for "Total bit rate" and "Max bit rate (per 1 client)", the maximum concurrent access number may be less than 8 users. When 8 users are concurrently accessing, the access limit message will be displayed for users who subse- quently attempt to access. When "Multicast" is selected for "Transmission type" of "MPEG-4 setup", users who are monitoring MPEG-4 images will not be limited to access.

When "ON" is selected for "MPEG-4 transmission" (page 36), an MPEG-4 image will be displayed. When "OFF" is selected, a JPEG image will be dis- played. It is possible to display a JPEG image even when "ON" is selected for "MPEG-4 transmission". In this case, the refresh interval will be limited.

<Refresh interval (MPEG-4)>

When "ON" is selected for "MPEG-4 transmission" JPEG (VGA): 5 fps

JPEG (QVGA): 10 fps

When "OFF" is selected for "MPEG-4 transmission" JPEG (VGA or QVGA): 30 fps

The refresh interval may be longer depending on a network environment, PC spec, photographic sub- ject, access traffic, etc.

Refer to the following page for further information about the "Live" page.

4

Image 4
Contents Network Operating Instructions Contents Preface About these operating instructionsTrademarks and registered trademarks Viewer softwareMonitor images on a PC Monitor images from a single cameraStep Refresh interval MPEG-4About the Live 1AUTO Mode *2 SD button manual SD recording button *2List button *1 Zoom buttons *24PRESET *2 2Control pad/buttons *23BRIGHTNESS buttons *2 5Camera title@ SD recording status indicator Mic input button *3@ Audio output button *3 @2Main area *2Monitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Alarm typeAction at an alarm occurrence Notify of alarm occurrences by e-mailTransmit images onto an FTP server Save images on the SD memory card SD memory card UseDisplay the log list Number of the listed logs TOP buttonPrev Page button Next Page buttonDownload button Close buttonAbout the playback Number of the listed imagesPlay button REV Play buttonStop button Next Image buttonPrev Image button FF/REW buttonsAbout the network security of the camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the setup menu window Network setup button Schedule setup buttonMaintenance button 3SetupConfigure the basic settings of the camera Basic setup Configure the basic settings BasicAlarm status update mode Default Real timeAlarm status port Default onConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size VGA Image capture size QvgaConfigure the settings relating to the logs LOG AlarmFTP error ManualOFF SD memory Save trigger LOG tab SD memory card tab Logs and associated imagesSave logs Card SD memory Overwrite Save logs CardJpeg setup Default VGA Image qualityDefault 5 fps Refresh interval JpegMPEG-4 setup Default Normal Refresh interval MPEG-4Default 3 sec Transmission type MPEG-4 transmissionDefault Unicast port2 Audio Default Multicast addressDefault Multicast TTL Available value 1 DefaultDefault OFF Camera title on screen 0-9, A-Z Default 1 min Image HoldCamera title on screen Home positionPan·Tilt degree/Zoom ratio display Upside-downTilt Angle Image Adjust Preset PositionAuto Pan Privacy ZoneSuper Dynamic About SUPER-D 3 Super Dynamic functionDefault Auto Default on High Sensitivity upSimple Black & white mode Default ATW1Default High Chroma gain level Red GainBlue Gain DNR Digital Noise ReductionSet mask areas Register the preset position Edit the settings of the registered preset positionPosition No Position Auto panZone setting Privacy zoneMode Zone selectConfigure the settings relating to audio Audio Audio output volume PC to Camera Default Middle Audio output interval PC to CameraAuthentication Audio output port PC to CameraIP address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Configure the settings relating to the alarm Alarm Configure the alarm settings Alarm setupAlarm setup Camera motion on alarm Command alarm Configure the settings relating to the alarm image Alarm image setupAlarm output terminal setup Configure the settings relating to the alarm out terminalAUX name Set the VMD areas VMD area Default OFF Detection sensitivity StatusSet the VMD areas for each preset position Delete the VMD area set for the designated preset position Default MiddleMail notification setup Panasonic alarm protocol setup Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol User authentication Default OFF User namePassword Retype password Number of characters for the password 4 32 charHost authentication Default OFF Access levelConfigure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP FTP modeDefault Passive FTP server address Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupNetwork setup Default gateway Unavailable IP addresses for the default gate- wayAvailable port number 1 Default Port numbers already in use Default Manual Primary DNS, Secondary DNSWAN Configure the settings relating to Ddns Ddns Access intervalDefault OFF Host name Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp Default OFF Directory FTP periodic transmissionFTP periodic transmission Number of characters for the directory name 1How to configure the schedule settings Schedule setupInterval How to delete the set schedule How to set the schedules Error message Maintenance of the camera MaintenanceCheck the system log System log Upgrade the firmware Upgrade How to upgrade the firmwareInitialize setup data and Html data Initialize/restart the camera InitializationInitialize Html data RestartError indications relating to Smtp Error indications relating to FTPAbout the displayed system log Category Indication DescriptionError indications relating to NTP Error indications relating to DdnsError indications relating to login Troubleshooting Cause/solutionSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages Directory structure of drive B FTPGroup LAN IP address LAN port WAN IP address Protocol Setting example of the routerGroup WAN IP address Protocol LAN IP address LAN port N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.