Panasonic WV-NS202A operating instructions Configuring the network settings Network setup

Page 67

Configuring the network settings [Network setup]

The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page.

The "Network setup" page has 4 tabs; the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab.

Configure the network settings [Network]

Click the [Network] tab on the "Network setup" page. (pages 20 and 21: How to display/operate the setup menu) The following information is required to configure the network settings.

Contact the network administrator or your Internet service provider.

IP address

Net mask

Default gateway (when using the gateway server/router)

HTTP port

Primary DNS, Secondary DNS (when using DNS)

Network setup

[DHCP]

Select "ON" or "OFF" to determine whether or not to use the DHCP function.

Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs whose IP address is unique. Refer to the network administrator for further information about the settings of the server.

Default: OFF

[IP address]

When not using the DHCP function, enter the IP address of the camera. Do not enter an IP address already in use (for the PCs and the other network cam- eras).

Default: 192.168.0.10

<Unavailable IP addresses>

0.*.*.* *.*.*.0

255.*.*.* *.*.*.255 127.0.0.1

Class D addresses (224.0.0.0 - 239.255.255.255) Class E addresses (240.0.0.0 - 255.255.255.255)

Note:

These IP addresses are unavailable even when using the DHCP function. Refer to the network administrator for further information about the set- tings of the DHCP server.

[Net mask]

When not using the DHCP function, enter the net mask of the camera.

Default: 255.255.255.0

67

Image 67
Contents Network Operating Instructions Contents Viewer software PrefaceAbout these operating instructions Trademarks and registered trademarksRefresh interval MPEG-4 Monitor images on a PCMonitor images from a single camera StepAbout the Live Zoom buttons *2 1AUTO Mode *2SD button manual SD recording button *2 List button *15Camera title 4PRESET *22Control pad/buttons *2 3BRIGHTNESS buttons *2@2Main area *2 @ SD recording status indicatorMic input button *3 @ Audio output button *3Monitor images from multiple cameras Record images on the SD memory card manually Notify of alarm occurrences by e-mail Action at an alarm occurrenceAlarm type Action at an alarm occurrenceTransmit images onto an FTP server SD memory card Use Save images on the SD memory cardDisplay the log list Next Page button Number of the listed logsTOP button Prev Page buttonClose button Download buttonREV Play button About the playbackNumber of the listed images Play buttonFF/REW buttons Stop buttonNext Image button Prev Image buttonAbout the network security of the camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the setup menu window 3Setup Network setup buttonSchedule setup button Maintenance buttonConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDefault on Alarm status update modeDefault Real time Alarm status portConfigure the settings relating to the NTP server NTP SD memory card setup SD memory card information Step Image capture size Qvga Image capture size VGAManual Configure the settings relating to the logs LOGAlarm FTP errorOFF SD memory Save trigger LOG tab SD memory card tab Logs and associated imagesSave logs Card Overwrite Save logs Card SD memoryRefresh interval Jpeg Jpeg setupDefault VGA Image quality Default 5 fpsMPEG-4 transmission MPEG-4 setupDefault Normal Refresh interval MPEG-4 Default 3 sec Transmission typeAvailable value 1 Default Default Unicast port2 AudioDefault Multicast address Default Multicast TTLHome position Default OFF Camera title on screen 0-9, A-ZDefault 1 min Image Hold Camera title on screenPan·Tilt degree/Zoom ratio display Upside-downTilt Angle Privacy Zone Image AdjustPreset Position Auto PanAbout SUPER-D 3 Super Dynamic function Super DynamicDefault ATW1 Default AutoDefault on High Sensitivity up Simple Black & white modeDNR Digital Noise Reduction Default High Chroma gain levelRed Gain Blue GainSet mask areas Edit the settings of the registered preset position Register the preset positionPosition No Auto pan PositionZone select Zone settingPrivacy zone ModeConfigure the settings relating to audio Audio Audio output port PC to Camera Audio output volume PC to CameraDefault Middle Audio output interval PC to Camera AuthenticationIP address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Configure the settings relating to the alarm Alarm Configure the alarm settings Alarm setupAlarm setup Camera motion on alarm Command alarm Alarm image setup Configure the settings relating to the alarm imageAlarm output terminal setup Configure the settings relating to the alarm out terminalAUX name Set the VMD areas VMD area Status Default OFF Detection sensitivitySet the VMD areas for each preset position Default Middle Delete the VMD area set for the designated preset positionMail notification setup Panasonic alarm protocol setup Configure the settings relating to Panasonic alarm protocolPanasonic alarm protocol Number of characters for the password 4 32 char User authenticationDefault OFF User name Password Retype passwordDefault OFF Access level Host authenticationConfigure the settings relating to the mail server Mail Configure the settings of the servers Server setupNumber of characters for the FTP server address Configure the settings relating to the FTP server FTPFTP mode Default Passive FTP server addressConfigure the network settings Network Configuring the network settings Network setupNetwork setup Default Manual Primary DNS, Secondary DNS Default gatewayUnavailable IP addresses for the default gate- way Available port number 1 Default Port numbers already in useWAN Number of characters for the host name 1 64 char Configure the settings relating to Ddns DdnsAccess interval Default OFF Host nameConfigure the settings relating to Snmp Snmp Number of characters for the directory name 1 Default OFF DirectoryFTP periodic transmission FTP periodic transmissionHow to configure the schedule settings Schedule setupInterval How to delete the set schedule How to set the schedules Error message Maintenance of the camera MaintenanceCheck the system log System log How to upgrade the firmware Upgrade the firmware UpgradeRestart Initialize setup data and Html dataInitialize/restart the camera Initialization Initialize Html dataCategory Indication Description Error indications relating to SmtpError indications relating to FTP About the displayed system logError indications relating to NTP Error indications relating to DdnsError indications relating to login Cause/solution TroubleshootingSymptom Symptom Symptom Symptom Symptom Cause/solution Reference Pages Solutions Reference Pages FTP Directory structure of drive BGroup LAN IP address LAN port WAN IP address Protocol Setting example of the routerGroup WAN IP address Protocol LAN IP address LAN port N0407-0 3TR005115AAA
Related manuals
Manual 2 pages 19.41 Kb Manual 2 pages 61.33 Kb

WV-NS202A specifications

The Panasonic WV-NS202A is a high-performance network camera designed to provide advanced surveillance solutions for various security applications. With its plethora of features, cutting-edge technologies, and robust characteristics, this camera is ideal for both indoor and outdoor monitoring needs.

One of the standout features of the WV-NS202A is its 360-degree pan and 90-degree tilt capability, allowing for a comprehensive view of any given area. This unprecedented range of motion ensures maximum coverage while minimizing blind spots, making it suitable for large spaces such as shopping malls, airports, and corporate buildings. Additionally, the camera supports continuous rotation, enabling it to follow moving objects seamlessly.

The camera is equipped with a high-resolution imaging sensor that produces clear and detailed images, even in low-light conditions. The WV-NS202A employs advanced image processing technologies, including digital noise reduction and wide dynamic range, to enhance image quality further. This ensures that the camera captures accurate color reproduction and clarity, regardless of lighting scenarios, making it ideal for 24/7 surveillance.

In terms of connectivity, the WV-NS202A supports IP technology, allowing for easy integration into existing network infrastructures. The camera can deliver real-time video over a network, which can be accessed remotely from multiple devices, including smartphones, tablets, or computers. This remote accessibility is complemented by built-in web server functionality, enabling users to monitor video feeds and manage camera settings conveniently through a browser interface.

Panasonic has also prioritized security with the WV-NS202A, incorporating features such as user authentication, HTTPS encryption, and IP filtering. These comprehensive security measures ensure that video feeds are protected from unauthorized access, providing peace of mind for users.

Another notable characteristic of this camera is its durability. The WV-NS202A is designed to withstand various environmental conditions, boasting an IP66 rating for water and dust resistance. This makes it suitable for outdoor installations, where it can endure extreme weather conditions without compromising performance.

With its exceptional features, innovative technologies, and robust characteristics, the Panasonic WV-NS202A is a formidable solution for those seeking reliable security and surveillance. Its ease of use, coupled with advanced performance specifications, makes it an excellent choice for safeguarding assets and ensuring the safety of people in various environments.