![](/images/new-backgrounds/1242408/24240823x1.webp)
Preparation
Using a battery pack made by Anton Bauer
Before use, charge the battery pack using the exclusive battery charger made by Anton Bauer.
For the charging time and other details, refer to the operating instructions of the battery charger used.
1 AttachBauer. the battery pack made by Anton
Power output connector for lighting
Battery pack made by Anton Bauer
Lighting control switch
<Reference>
A battery holder made by Anton Bauer is equipped with a power output connector for the lighting and a lighting control switch to enable a light to be easily attached. For details on the lighting systems available, contact Anton Bauer.
2 Insert the battery pack and slide it in the direction of the arrow.
2
Release lever
<Reference>
To remove the battery pack, slide it in the opposite direction to the one in which it was attached while keeping the release lever on the battery holder pulled down all the way.
3 Set the battery type.
Select the battery type using <BATTERY> on the
Example: Select “NiCd13” if the TRIMPAC13 is to be used; select “NiCd14” if the TRIMPAC14 is to be used. (See page 34)
Using the NP-1B battery pack made by Sony
Before use, charge the battery pack using the exclusive battery charger made by Sony.
For the charging time and other details, refer to the operating instructions of the battery charger used.
1 Remove the battery holder.
Refer to step 1 on page 10.
2 Attachunit. the battery made by Sony to the
Battery case
2
4
Cover
3
15
| Screw provided |
| |
Mounting |
| ||
with mounting |
| ||
connector for |
| ||
connector for | Hole | ||
| |||
| |||
|
|
First, remove the battery holder cover.
1Attach the mounting connector for the
2Use the mounting screws to mount the battery case.
3 Tighten the screw for the power supply contact.
4 Insert the top of the cover in the direction of the arrow.
5 Align the hole in the bottom of the cover (metal part) with the hole in the bottom of the battery case, and attach using the screw provided with mounting connector for
3 Set the battery type.
Select the battery type using <BATTERY> on the
Select “NiCd12” if the
11 (E)