Panasonic AG-DVC 200E manual Mounting the unit on a tripod Attaching the viewfinder, Microphone

Page 14

Preparation

Mounting the unit on a tripod	Attaching the viewfinder and
Use the tripod attachment to mount the unit on a tripod.	microphone
Use the tripod attachment to mount the unit on a tripod.
1 Mount the tripod attachment on the tripod.	For details on the attachment and adjustments of the viewfinder and
1 Mount the tripod attachment on the tripod.	microphone, refer to the operating instructions of the viewfinder.
Tripod attachment

Tripod head

<Note>

Take account of the centre of gravity of the unit and that of the tripod attachment when selecting the attachment hole. Check that the diameter of the hole selected matches the diameter of the tripod head screw.

2 Mount the unit on the tripod attachment.

Slide the unit along the groove toward the front until it clicks into place.

Detaching the unit from the tripod attachment

Tripod attachment

Attaching the shoulder belt (optional accessory)

Shoulder belt

The tab opens when it is pressed.

To disengage the shoulder belt,

	open the tabs of the attachment	The tab opens
		when it is
	parts, and disengage.
		pressed.

<Note>

Check that the shoulder belt is attached securely.

Red lever

Black lever

While pushing down the red lever, move the black lever in the direction of the arrow and slide the unit toward the back to remove it.

<Note>

If the pin of the tripod attachment fails to return to its original position after the unit has been detached, again move the black lever in the direction of the arrow while pushing down the red lever, and return the pin to its original position. Bear in mind that the unit cannot be attached if the pin remains in the centre.

13 (E)

Image 14

Contents AG- E Digital Video Camera RecorderPrecautions for Use To remove the battery/Verwijderen van de batterijVaroitus Lithium BatteryVarning Do not Remove Panel Cover by UnscrewingContents Features IntroductionRain cover System configurationCleaning tape Digital Video Camera RecorderParts and their functions Reset button Breaker switchMonitor volume control POWER/WARNING lampShutter switch Auto W/B white/black BAL switchGenlock in connector BNC = Viewfinder connectorTally lamp DV I/F connector complying with Ieee StandardDC OUT DC power supply output socket External DC input socketSet the battery type Remove the battery holderAttach the battery case to the unit PreparationAttachunit. the battery made by Sony to Using a battery pack made by Anton BauerUsing the NP-1B battery pack made by Sony AttachBauer. the battery pack made by AntonRaise the lens lever, and remove the mount cap Proceed with the flange back adjustment for the lensAttaching the lens Pulllens. down the lens lever to secureMicrophone Attaching the shoulder belt optional accessoryMounting the unit on a tripod Attaching the viewfinder Detaching the unit from the tripod attachmentSpace ∏ Letters of the alphabet a through Z Setting the camera IDSetting the date and time White shading adjustment Lens adjustments and checksFlange back adjustment White shading checkViewfinder screen status displays Viewfinder displaysViewfinder lamp displays Iris Mode switch Switch settingsError result message Extender displayTemperature display ATW, AWB channel Temperature fineAdjustment amount Shutter speedSelecting the viewfinder screen display Push the Auto W/B BAL switch to ABB and release it White balance and black balance adjustmentSet the switches to the positions shown in the figure 50 HzPushSEL. the Shutter switch from on to Electronic shutter settingsSetting the synchro scanning mode Shutter modesSetting the time code Time data settingsSetting the user’s bit Set the TCG switchScene file function Scene file setting methodScene files Editing scene filenamesRotate the JOG dial button to move to the Write item How to use file selectReturning a scene filename to its default Press the Menu button to exit the menu operationList of scene file settings List of file settingsRecording methods Set the camera unit’s switches as followsNormal recording Scene-to-scene continuitySelect the desired input signals using the Audio in switch Selecting the audio input signalsAdjusting the audio recording level Audio recordingOther functions Using the unit as a player Using the unit with external componentsConnection to a video component with a DV connector Connection to a PC capable of non-linear editingUpon completion of the settings, press the Menu button Menu display enable/disableDisplaying sub-menus and deciding on settings Menu operationsMain 2/2 Setting menu configurationMain 1/2 Menu contents Process SW ModeMain menu 1 of 2 main menu Additional ProcessVTR Function BatteryVideo OUT VTR OptionLens Shading Main menu 2 of 2 main menuMIC/AUDIO MARKER/ZEBRAVF Display 1/2 VF Display 2/2Genlock DiagnosticLED Camera IDServo SlackREC Warning HumidSet the power to OFF Battery ENDBattery Near END Emergency ejectMaintenance Error codesAudio system SpecificationsVideo system Tape transport systemOutput Optional accessory AJ-VF10Input OtherVQT9278-1 F0401T1051 @