Panasonic AG-DVC 200E manual Specifications, Video system, Audio system, Tape transport system

Page 42

Specifications

[GENERAL]

Power requirements: DC 12 V (11.0 V to 17.0 V)

Power consumption: 18 W

indicates safety information.

Operating temperature:

0 °C to +40 °C

Storage temperature:

–20°C to +60 °C

Operating humidity:

Less than 85% (relative humidity)

Continuous operating time:

Approx. 120 min. (continuous recording time using the TRIMPAC14 made by Anton Bauer)

Dimensions (W a H a D):

123 a 190 a 292 mm (excluding grip)

Weight:

Approx. 3 kg (main unit only)

[CAMERA UNIT]

Pickup device:

1/2-inch IT type CCD (480,000 pixels)

System:

RGB 3-CCD system

Total number of pixels:

795(H) a 596(V)

Number of effective pixels:

752(H) a 582(V)

Spectral system: f/1.4 prism system

Internal filters:

1:3200K (clear)

2:5600K + 1/8ND

3:5600K

4:5600K + 1/64ND

Quantizing:

10 bits, non-linear

Sampling frequency:

14.1875 MHz

Digital signal processing:

28.375 MHz

Horizontal drive frequency:

14.1875 MHz

Programmable gain:

3 positions (L, M and H) selected from 0, 3, 6, 9, 12, 15, 18, 21, 24, 30, 36 dB

Shutter speed

Preset: 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000

Variable: 1/50.2 to 1/248.0

Lens mount:

Bayonet type

Sensitivity:

F11 (2000 lux)

Minimum subject brightness: 0.5 lux (at f/1.4 +36 dB)

Video S/N ratio:

60 dB (standard)

Horizontal resolution:

800 lines (at centre) (CAM OUT connector)

Registration:

Less than 0.05% (total area, lens distortion excluded)

Geometric distortion:

Negligible (lens distortion excluded)

[VTR UNIT]

Video system

Recording format:

DV format

Sampling frequency

Y:13.5 MHz

Quantizing: 8 bits

Audio system

Recording format:

Digital PCM stereo recording 16 bits (48 kHz/2 channels) 12 bits (32 kHz/2 channels)

Frequency response:

20 Hz to 20 kHz (at 48 kHz)

Tape transport system

Tape format:

DV standard cassettes

Tape speed:

18.831 mm/sec.

Maximum recording time:

276 min.

41 (E)

Image 42
Contents AG- E Digital Video Camera RecorderPrecautions for Use To remove the battery/Verwijderen van de batterijVaroitus Lithium BatteryVarning Do not Remove Panel Cover by UnscrewingContents Features IntroductionRain cover System configurationCleaning tape Digital Video Camera RecorderParts and their functions Reset button Breaker switchMonitor volume control POWER/WARNING lampShutter switch Auto W/B white/black BAL switchGenlock in connector BNC = Viewfinder connectorTally lamp DV I/F connector complying with Ieee StandardDC OUT DC power supply output socket External DC input socketSet the battery type Remove the battery holderAttach the battery case to the unit PreparationAttachunit. the battery made by Sony to Using a battery pack made by Anton BauerUsing the NP-1B battery pack made by Sony AttachBauer. the battery pack made by AntonRaise the lens lever, and remove the mount cap Proceed with the flange back adjustment for the lensAttaching the lens Pulllens. down the lens lever to secureMicrophone Attaching the shoulder belt optional accessoryMounting the unit on a tripod Attaching the viewfinder Detaching the unit from the tripod attachmentSetting the camera ID Setting the date and timeSpace ∏ Letters of the alphabet a through Z White shading adjustment Lens adjustments and checksFlange back adjustment White shading checkViewfinder displays Viewfinder lamp displaysViewfinder screen status displays Iris Mode switch Switch settingsError result message Extender displayTemperature display ATW, AWB channel Temperature fineAdjustment amount Shutter speedSelecting the viewfinder screen display Push the Auto W/B BAL switch to ABB and release it White balance and black balance adjustmentSet the switches to the positions shown in the figure 50 HzPushSEL. the Shutter switch from on to Electronic shutter settingsSetting the synchro scanning mode Shutter modesSetting the time code Time data settingsSetting the user’s bit Set the TCG switchScene file function Scene file setting methodScene files Editing scene filenamesRotate the JOG dial button to move to the Write item How to use file selectReturning a scene filename to its default Press the Menu button to exit the menu operationList of scene file settings List of file settingsRecording methods Set the camera unit’s switches as followsNormal recording Scene-to-scene continuitySelect the desired input signals using the Audio in switch Selecting the audio input signalsAdjusting the audio recording level Audio recordingOther functions Using the unit as a player Using the unit with external componentsConnection to a video component with a DV connector Connection to a PC capable of non-linear editingUpon completion of the settings, press the Menu button Menu display enable/disableDisplaying sub-menus and deciding on settings Menu operationsSetting menu configuration Main 1/2Main 2/2 Menu contents Process SW ModeMain menu 1 of 2 main menu Additional ProcessVTR Function BatteryVideo OUT VTR OptionLens Shading Main menu 2 of 2 main menuMIC/AUDIO MARKER/ZEBRAVF Display 1/2 VF Display 2/2Genlock DiagnosticLED Camera IDServo SlackREC Warning HumidSet the power to OFF Battery ENDBattery Near END Emergency ejectMaintenance Error codesAudio system SpecificationsVideo system Tape transport systemOutput Optional accessory AJ-VF10Input OtherVQT9278-1 F0401T1051 @