Axis Communications thermal network camera user manual Events

Page 29

AXIS Q1931–E Thermal Network Camera

Events

Events

The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.

Available action rule triggers and conditions include:

Applications – Use installed applications to trigger the rule. See Applications, on page 27.

Detectors

-Audio Detection – Trigger the rule when audio is detected. SeeAudio Detection, on page 26.

-Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage playback. This can for example be used to send notifications.

-Motion Detection – Trigger the rule when motion is detected. See Motion Detection, on page 25.

Hardware

-Heater – Trigger the rule if the heater is malfunctioning. This can for example be used to send maintenance notifications.

-Network – Trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.

-Temperature – Trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.

Input Signal

-Digital Input Port – Trigger the rule when an I/O port receives a signal from a connected device. SeeI/O Ports, on page 44.

-Manual Trigger – Trigger the rule using the Manual Trigger button in the Live View page. SeeControls on the Live View Page, on page 8 . This can for example be used to validate actions during product installation and configuration.

-Virtual Inputs – can be used by a VMS (Video Management System) to trigger actions. Virtual inputs can, for example, be connected to buttons in the VMS user interface.

Storage

-Disruption – Trigger the rule if storage problems are detected, for example if the storage device is unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to send maintenance notifications.

-Recording – Triggers the rule when the Axis product records to the storage device. The recording status trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.

System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

Time

-Recurrence – Trigger the rule periodically. SeeRecurrences, on page 32. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 32.

29

Image 29
Contents Axis Q1931-E Thermal Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1931-E Thermal Network Camera Table of ContentsNetwork Connector Connectors and ButtonsAudio Connector Hardware OverviewPower Connector LED IndicatorsSD Card Slot Control ButtonAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Half-duplex modeMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductSetting Up the Product Video and Audio Video and AudioVideo Stream Pixel Counter264 Click Save to apply the new settingsImage Exposure Settings Camera SettingsVideo and Audio Stream Profiles OverlayOverlay Image Using Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesPrivacy Mask Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsAxis Q1931-E Thermal Network Camera Default Viewer for Browsers Live View ConfigLive View Config Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsActive/Inactive displays two buttons, one or each action Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications Install ApplicationApplications Application LicensesAxis Q1931-E Thermal Network Camera Events EventsGo to Events Action Rules and click Add Setting Up an Action RuleFallback Action Events Recipients Setting Up an Email RecipientRecipient Use with action Go to Events Recipients and click AddRecurrences SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportSystem Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card System Options StorageNetwork Share Go to System Options Storage and click SD CardPorts & Devices MaintenancePorts Port StatusAdvanced System Options SupportFile Upload Reset to Factory Default SettingsPlain Config Function Pin Specifications Multi-Connector Cable sold separatelyMulti-Connector Cable sold separately Connector Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Problems with streaming H.264 Product is accessible locally but not externallyBasic Key framesSetup Video & Audio Camera Settings Video and image problems, generalSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsAlarm triggers Function/group Specifications Audio Audio streamingAlarm events InstallationPerformance Considerations Axis Q1931-E Thermal Network Camera M3.4