Axis Communications thermal network camera user manual Detectors, Motion Detection

Page 25

AXIS Q1931–E Thermal Network Camera

Detectors

Detectors

Motion Detection

Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.

Motion detection is configured by defining up to 10 Include and Exclude windows:

Include windows — define areas where motion should be detected

Exclude windows — define areas within an Include window that should be ignored (areas outside Include windows are automatically ignored).

For instructions, see Set Up Motion Detection Windows, on page 25.

To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be adjusted. See Motion Detection Parameters, on page 26.

Once motion detection windows are configured, the Axis product can be configured to perform actions when motion is detected. Possible actions include uploading images and start recording. For more information, see Setting Up an Action Rule, on page 30.

Note

Using the motion detection feature may decrease the product’s overall performance.

The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

25

Image 25
Contents Axis Q1931-E Thermal Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1931-E Thermal Network Camera Table of ContentsNetwork Connector Connectors and ButtonsAudio Connector Hardware OverviewPower Connector LED IndicatorsSD Card Slot Control ButtonAccessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Accessing the Product Access from the InternetLive View Controls on the Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Half-duplex modeMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterImage Click Save to apply the new settings264 Exposure Settings Camera SettingsVideo and Audio Stream Profiles OverlayOverlay Image Using Overlay Text in an Action RuleGo to Video & Audio Overlay Image Go to Events Action RulesPrivacy Mask Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsAxis Q1931-E Thermal Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsActive/Inactive displays two buttons, one or each action Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications Install ApplicationApplications Application LicensesAxis Q1931-E Thermal Network Camera Events EventsFallback Action Setting Up an Action RuleGo to Events Action Rules and click Add Events Recipients Setting Up an Email RecipientRecipient Use with action Go to Events Recipients and click AddRecurrences SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Click Install certificate and upload the certificate Go to Setup System Options Security CertificatesDate & Time Audio SupportSystem Options Network Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsDNS Configuration Axis Video Hosting System AvhsHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card System Options StorageNetwork Share Go to System Options Storage and click SD CardPorts & Devices MaintenancePorts Port StatusAdvanced System Options SupportPlain Config Reset to Factory Default SettingsFile Upload Multi-Connector Cable sold separately Multi-Connector Cable sold separatelyFunction Pin Specifications Connector Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Key framesSetup Video & Audio Camera Settings Video and image problems, generalSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsAlarm triggers Function/group Specifications Audio Audio streamingAlarm events InstallationPerformance Considerations Axis Q1931-E Thermal Network Camera M3.4