![](/images/new-backgrounds/1318481/31848129x1.webp)
AXIS P3354 Network Camera
Setting Up the Product
Video
It is possible to configure the following video features in your Axis product:
•Video stream. See page 15.
•Stream profiles. See page 16.
•Camera settings. See page 16.
•View area. See page 18.
•Overlay image. See page 19.
•Privacy mask. See page 20.
•Focus and zoom. See page 20.
Video Stream
You can define the following video stream settings from Video > Video Stream:
•Image. See page 15.
•H.264. See page 16.
•MJPEG. See page 16.
Image
The default image settings can be configured under Video> Video Stream. Select the Image tab.
The following settings are available:
•Resolution. Select the default resolution.
•Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the compression, the higher the image quality with higher bandwidth requirements and larger file sizes.
•Rotate image. If required, the image can be rotated.
•Mirror. If required, the image can be mirrored.
•Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can be set as Unlimited, which means the Axis product always delivers the highest frame rate possible under the current conditions.
•Overlay settings. See Overlay, on page 19.
Click Save to apply the new settings.
Pixel Counter
The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example in face recognition.
The pixel counter can be accessed from:
•Video > Video Stream. Under Preview, click Open and select the Show pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Height fields and click Apply.
15