Axis Communications P3354 user manual Setting Up an Action Rule, System, Time, PTZ Control

Page 32

AXIS P3354 Network Camera

Events

•System

-System Ready – Trigger the rule when the product has been started and all services are running. This can for example be used to send a notification when the product restarts.

•Time

-Recurrence – Trigger the rule periodically. See Recurrences, on page 34. This can for example be used to upload an image every 5 minutes.

-Use Schedule – Trigger the rule according to the selected schedule. See Schedules, on page 33.

Available actions include:

•Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

•Overlay Text – Display an overlay text. See .

•PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour, on page 24.

•Record Video – Record video to a selected storage.

•Send Images – Send images to a recipient.

•Send Notifications – Send a notification message to a recipient.

•Send Video Clip – Send a video clip to a recipient.

•Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send an email notification. If multiple conditions are defined, all of them must be met to trigger the action.

The following example describes how to set up an action rule to record video to a network share if there is movement in the camera’s field of view.

Set up motion detection and add a network share:

1.Go to Detectors > Motion Detection and configure a motion detection window. See page 27

2.Go to System Options > Storage and set up the network share. See page 43.

Set up the action rule:

1.Go to Events > Action Rules and click Add.

2.Select Enable rule and enter a descriptive name for the rule.

3.Select Detectors from the Trigger drop-down list.

4.Select Motion Detection from the drop-down list. Select the motion detection window to use.

5.Optionally, select a Schedule and Additional conditions. See below.

6.Under Actions, select Record Video from the Type drop-down list.

7.Select a Stream profile and configure the Duration settings as described below.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Axis P3354 Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3354 Network CameraConnectors and Buttons Network ConnectorFor technical specifications, see Hardware OverviewColor Indication LED IndicatorsSD Card Slot Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccessing the Product Access from the Internet Set the Root PasswordSet Power Line Frequency Click Create self-signed certificateAxis Media Control viewer toolbar Live ViewControls on the Live View PTZ Controls How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3354 Network Camera Basic Setup Setting Up the ProductSetting Up the Product Setting Up the Product Video Click Save to apply the new settingsVideo Stream Image264 Camera SettingsStream Profiles Exposure Settings Image AppearanceWhite Balance Wide Dynamic RangeIris adjustment View AreaDay/Night Go to Video View AreaSelect an Aspect ratio and a Video stream resolution OverlayOverlay Image Go to Video Video Stream and select the Image tabWhen satisfied, click Enable iris to enable the iris Privacy MaskFocus & Zoom Go to Video Video Stream and select the Image tabAxis P3354 Network Camera Live View Config Live View ConfigDefault Viewer for Browsers Viewer SettingsUser Defined Links Preset Positions PTZ Pan Tilt ZoomPTZ Pan Tilt Zoom Guard TourOperator Same as administrator but with lower priority PTZ Pan Tilt Zoom AdvancedControl Queue ControlsDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAxis P3354 Network Camera Install Application ApplicationsApplications Application LicensesAxis P3354 Network Camera Events EventsSetting Up an Action Rule SystemTime PTZ ControlRecipients SchedulesRecipient Use with action Go to Events Recipients and click AddRecurrences To create a new scheduleGo to Events Schedules and click Add Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersGo to System Options Security Ieee IeeeCertificates Basic TCP/IP Settings Go to Setup System Options Security CertificatesDate & Time NetworkIPv4 Address Configuration IPv6 Address ConfigurationAxis Internet Dynamic DNS Service ARP/PingAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Storage BonjourSD Card Network ShareGo to System Options Storage Click Network Share MaintenanceTo add a network share System Options Support Support OverviewSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsFunction/group Specifications Network Security Alarm actionsInstallation Maintenance General CasingConnectors Performance ConsiderationsM3.4

P3354 specifications

Axis Communications P3354 is a high-performance network camera designed to meet the demands of modern security and surveillance applications. Engineered with advanced imaging technologies, this camera offers exceptional video quality, reliability, and versatility for various environments.

One of the key features of the P3354 is its high-resolution video capabilities. With a 2 MP sensor, the camera delivers crisp images at resolutions up to 1080p. This ensures clear and detailed video footage, making it suitable for identifying faces or reading license plates in security-critical applications. The camera supports multiple streaming formats, allowing users to select the appropriate compression and resolution for their specific needs.

The P3354 is built with Axis’ proprietary Wide Dynamic Range (WDR) technology, which enhances image quality in challenging lighting conditions. This is particularly useful in outdoor settings where there can be a significant contrast between light and dark areas. The camera can capture details in both bright highlights and dark shadows, ensuring comprehensive coverage of a scene.

Additionally, the P3354 features Lightfinder technology, which is designed to optimize performance in low-light environments. This innovative technology utilizes a sensitivity-enhancing mechanism that allows the camera to produce color images even in very low light, making it an ideal solution for nighttime security.

The camera's robust design is built to withstand environmental challenges. It comes with an IP66 rating, ensuring that it is dust-tight and can withstand heavy rain, making it suitable for both indoor and outdoor use. The P3354 is also equipped with a tamper-resistant casing to deter vandalism and unauthorized access.

Axis’ application platform enables users to integrate the P3354 with various video management systems and smart analytics features. The camera supports features such as motion detection, audio detection, and tampering alarm, ensuring proactive security monitoring.

Installation and configuration are user-friendly, thanks to the camera's Power over Ethernet (PoE) capability, which simplifies wiring requirements. The P3354 can be easily mounted on walls or ceilings, providing flexible placement options to meet surveillance needs.

In summary, the Axis Communications P3354 is a versatile network camera that combines high-resolution imaging, advanced technologies like WDR and Lightfinder, along with a durable design suited for various environmental conditions. With these features, the P3354 stands as a reliable choice for comprehensive surveillance and security applications.
Top Page Image Contents