Axis Communications P3354 Overlay Image, Select an Aspect ratio and a Video stream resolution

Page 19

AXIS P3354 Network Camera

Setting Up the Product

2.Select an Aspect ratio and a Video stream resolution.

3.Use the mouse to move and resize the view area.

4.Select Enable PTZ to enable digital PTZ for the view area.

5.Click Save to save the settings.

Note

The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specific part of the full view.

Overlay

Overlays are used to provide extra information, for example for forensic video analysis or during product installation and configuration. Overlays are superimposed over the video stream.

An overlay text can display the current date and time, or a text string. When using a text string, modifiers can be used to display information such as the current bit rate or the current frame rate. For information about available modifiers, see File Naming &

Date/Time Formats in the online help .

It is also possible to display text when an action rule is triggered, see .

To enable overlays:

1.Go to Video > Video Stream and select the Image tab.

2.To include an overlay image, select Include overlay image at the coordinates. The overlay image must first be uploaded to the Axis product, see Overlay Image.

3.To include date and time, select Include date and Include time.

4.To include a text string, select Include text and enter the text in the field. Modifiers can be used, see File Naming &

Date/Time Formats in the online help .

5.Define text overlay characteristics in the relevant fields.

6.Click Save.

To modify the date and time format, go to System Options > Date & Time. See Date & Time, on page 38.

Overlay Image

An overlay image is a static image superimposed over the video stream. The image, for example company logo, is used to provide extra information or to mask a part of the image.

Since it is static, the position and size of an overlay image will remain the same regardless of resolution and Pan/Tilt/Zoom movements. To set up a dynamic mask, which will always mask the specified part of monitored area, see Privacy Mask, on page 20

To use an overlay image, the image must first be uploaded to the Axis product:

1.Go to Video > Overlay Image.

2.Click Browse and browse to the file.

3.Click Upload.

4.Select the image to use from the Use overlay image list.

5.Click Save.

To display the overlay image:

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Axis P3354 Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis P3354 Network Camera Table of ContentsHardware Overview Connectors and ButtonsNetwork Connector For technical specifications, seeSD Card Slot LED IndicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserClick Create self-signed certificate Accessing the Product Access from the InternetSet the Root Password Set Power Line FrequencyControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis P3354 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Image Setting Up the Product VideoClick Save to apply the new settings Video StreamStream Profiles Camera Settings264 Wide Dynamic Range Exposure SettingsImage Appearance White BalanceGo to Video View Area Iris adjustmentView Area Day/NightGo to Video Video Stream and select the Image tab Select an Aspect ratio and a Video stream resolutionOverlay Overlay ImageGo to Video Video Stream and select the Image tab When satisfied, click Enable iris to enable the irisPrivacy Mask Focus & ZoomAxis P3354 Network Camera Viewer Settings Live View ConfigLive View Config Default Viewer for BrowsersUser Defined Links Guard Tour Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomControls Operator Same as administrator but with lower priorityPTZ Pan Tilt Zoom Advanced Control QueueMotion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis P3354 Network Camera Application Licenses Install ApplicationApplications ApplicationsAxis P3354 Network Camera Events EventsPTZ Control Setting Up an Action RuleSystem TimeGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesTo create a new schedule Go to Events Schedules and click AddContinuous Recording RecordingsRecordings Recording ListUsers System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & TimeARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Axis Internet Dynamic DNS ServiceHost Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP ConfigurationFTP NAT traversal port mapping for IPv4RTP/H.264 QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMNetwork Share StorageBonjour SD CardTo add a network share MaintenanceGo to System Options Storage Click Network Share Logs & Reports System Options SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyBasic Storage and disk management problems Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Video Camera SettingsTechnical Specifications Technical SpecificationsMaintenance General Casing Function/group Specifications Network SecurityAlarm actions InstallationPerformance Considerations ConnectorsM3.4

P3354 specifications

Axis Communications P3354 is a high-performance network camera designed to meet the demands of modern security and surveillance applications. Engineered with advanced imaging technologies, this camera offers exceptional video quality, reliability, and versatility for various environments.

One of the key features of the P3354 is its high-resolution video capabilities. With a 2 MP sensor, the camera delivers crisp images at resolutions up to 1080p. This ensures clear and detailed video footage, making it suitable for identifying faces or reading license plates in security-critical applications. The camera supports multiple streaming formats, allowing users to select the appropriate compression and resolution for their specific needs.

The P3354 is built with Axis’ proprietary Wide Dynamic Range (WDR) technology, which enhances image quality in challenging lighting conditions. This is particularly useful in outdoor settings where there can be a significant contrast between light and dark areas. The camera can capture details in both bright highlights and dark shadows, ensuring comprehensive coverage of a scene.

Additionally, the P3354 features Lightfinder technology, which is designed to optimize performance in low-light environments. This innovative technology utilizes a sensitivity-enhancing mechanism that allows the camera to produce color images even in very low light, making it an ideal solution for nighttime security.

The camera's robust design is built to withstand environmental challenges. It comes with an IP66 rating, ensuring that it is dust-tight and can withstand heavy rain, making it suitable for both indoor and outdoor use. The P3354 is also equipped with a tamper-resistant casing to deter vandalism and unauthorized access.

Axis’ application platform enables users to integrate the P3354 with various video management systems and smart analytics features. The camera supports features such as motion detection, audio detection, and tampering alarm, ensuring proactive security monitoring.

Installation and configuration are user-friendly, thanks to the camera's Power over Ethernet (PoE) capability, which simplifies wiring requirements. The P3354 can be easily mounted on walls or ceilings, providing flexible placement options to meet surveillance needs.

In summary, the Axis Communications P3354 is a versatile network camera that combines high-resolution imaging, advanced technologies like WDR and Lightfinder, along with a durable design suited for various environmental conditions. With these features, the P3354 stands as a reliable choice for comprehensive surveillance and security applications.
Top Page Image Contents