Axis Communications P3354 user manual Iris adjustment, Day/Night, Go to Video View Area

Page 18

AXIS P3354 Network Camera

Setting Up the Product

•Fixed to use a fixed shutter speed.

Gain, measured in decibel (dB), is the amount of amplification applied to the image. A high gain may provide a better image in low light situations but will increase the amount of image noise.

Set Gain to

•Auto to set the gain automatically. If required, use Max gain to limit the applied gain.

•Fixed to use a fixed gain.

When Shutter and Gain are both set to Auto, it is possible to set the Priority between low motion blur and low noise manually and to use a different Priority in Normal Light and in Low Light.

Example

Consider an area where people or vehicles move during the day, but where there should be no movements during night. To be able to, for example, recognize faces or license plates, move the normal light priority slider toward low motion blur. At nighttime, motion detection is more important than identification. Motion blur is acceptable and since low light can cause a lot of noise, move

the low light priority slider toward low noise.

Example

If storage space or bandwidth is limited, try using a lower gain. This will reduce image noise and produce smaller image files.

Iris adjustment

Select Enable automatic iris adjustment to automatically compensate for changing light conditions. This option is not available if a fixed iris is used.

Use the Iris adjustment slider to set the preferred F-value. The scale represents the amount the iris is open. If set to 0, the iris is opened as much as possible. If set to 100, the iris is closed as much as possible. The actual F-value is shown below the slider. If automatic iris adjustment is enabled, the iris will stay at this position as long as light conditions are favorable. If light conditions change, the iris will adjust itself to the best iris settings. If automatic iris adjustment is disabled, the iris will lock on the set position regardless of light conditions

Day/Night

The IR cut filter prevents infrared (IR) light from reaching the image sensor. In poor lighting conditions, for example at night, or when using an external IR lamp, set the IR cut filter to Off. This increases light sensitivity and allows the product to “see” infrared light. The image is shown in black and white when the IR cut filter is off.

If using automatic Exposure control, set the IR cut filter to Auto to automatically switch between On and Off according to the lighting conditions.

The Day/Night shift level bar helps determine when the camera will shift from day mode to night mode. Normally, the camera automatically changes mode from day to night when very dark (level 100 in the slider). By setting Day/Night shift level to a lower value, the camera will change to night mode earlier.

View Area

A view area is a cropped part of the full view. The view area is treated as a video source in Live View and has its own video stream and PTZ settings.

When setting up a view area it is recommended that the video stream resolution is the same size as or smaller than the view area size. Setting the video stream resolution larger than the view area size implies digitally scaled up video after sensor capture, requiring more bandwidth without adding image information.

To enable, go to Video > Camera Settings and select Enable View Area.

To configure the view area:

1. Go to Video > View Area.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Axis P3354 Network Camera Liability About this DocumentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis P3354 Network CameraFor technical specifications, see Connectors and ButtonsNetwork Connector Hardware OverviewLED Indicators SD Card SlotColor Indication Access from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariSet Power Line Frequency Accessing the Product Access from the InternetSet the Root Password Click Create self-signed certificateLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ Controls Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAxis P3354 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video Stream Setting Up the Product VideoClick Save to apply the new settings ImageCamera Settings Stream Profiles264 White Balance Exposure SettingsImage Appearance Wide Dynamic RangeDay/Night Iris adjustmentView Area Go to Video View AreaOverlay Image Select an Aspect ratio and a Video stream resolutionOverlay Go to Video Video Stream and select the Image tabFocus & Zoom When satisfied, click Enable iris to enable the irisPrivacy Mask Go to Video Video Stream and select the Image tabAxis P3354 Network Camera Default Viewer for Browsers Live View ConfigLive View Config Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom Guard TourControl Queue Operator Same as administrator but with lower priorityPTZ Pan Tilt Zoom Advanced ControlsCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAxis P3354 Network Camera Applications Install ApplicationApplications Application LicensesAxis P3354 Network Camera Events EventsTime Setting Up an Action RuleSystem PTZ ControlRecipient Use with action RecipientsSchedules Go to Events Recipients and click AddGo to Events Schedules and click Add RecurrencesTo create a new schedule Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingSecurity System OptionsSystem Options UsersIeee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates NetworkAxis Internet Dynamic DNS Service IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264SD Card StorageBonjour Network ShareMaintenance To add a network shareGo to System Options Storage Click Network Share System Overview System Options SupportSupport Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Storage and disk management problemsTechnical Specifications Technical SpecificationsInstallation Function/group Specifications Network SecurityAlarm actions Maintenance General CasingConnectors Performance ConsiderationsM3.4

P3354 specifications

Axis Communications P3354 is a high-performance network camera designed to meet the demands of modern security and surveillance applications. Engineered with advanced imaging technologies, this camera offers exceptional video quality, reliability, and versatility for various environments.

One of the key features of the P3354 is its high-resolution video capabilities. With a 2 MP sensor, the camera delivers crisp images at resolutions up to 1080p. This ensures clear and detailed video footage, making it suitable for identifying faces or reading license plates in security-critical applications. The camera supports multiple streaming formats, allowing users to select the appropriate compression and resolution for their specific needs.

The P3354 is built with Axis’ proprietary Wide Dynamic Range (WDR) technology, which enhances image quality in challenging lighting conditions. This is particularly useful in outdoor settings where there can be a significant contrast between light and dark areas. The camera can capture details in both bright highlights and dark shadows, ensuring comprehensive coverage of a scene.

Additionally, the P3354 features Lightfinder technology, which is designed to optimize performance in low-light environments. This innovative technology utilizes a sensitivity-enhancing mechanism that allows the camera to produce color images even in very low light, making it an ideal solution for nighttime security.

The camera's robust design is built to withstand environmental challenges. It comes with an IP66 rating, ensuring that it is dust-tight and can withstand heavy rain, making it suitable for both indoor and outdoor use. The P3354 is also equipped with a tamper-resistant casing to deter vandalism and unauthorized access.

Axis’ application platform enables users to integrate the P3354 with various video management systems and smart analytics features. The camera supports features such as motion detection, audio detection, and tampering alarm, ensuring proactive security monitoring.

Installation and configuration are user-friendly, thanks to the camera's Power over Ethernet (PoE) capability, which simplifies wiring requirements. The P3354 can be easily mounted on walls or ceilings, providing flexible placement options to meet surveillance needs.

In summary, the Axis Communications P3354 is a versatile network camera that combines high-resolution imaging, advanced technologies like WDR and Lightfinder, along with a durable design suited for various environmental conditions. With these features, the P3354 stands as a reliable choice for comprehensive surveillance and security applications.
Top Page Image Contents