Axis Communications P3346-V Legal Considerations, Electromagnetic Compatibility EMC, Safety, RoHS

Page 2

Legal Considerations

Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes one (1) H.264 decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill applicable standards for:

Radio frequency emission when installed according to the instructions and used in its intended environment.

Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA - This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canada - This Class B digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022.This product fulfills the requirements for immunity according to EN 55024 residential and commercial environments.

Australia - This digital equipment fulfills the requirements for RF emission according to the Class B limit of AS/NZS CISPR 22.

Japan - この装置は、クラスB 情報技術装置です。 この装置は、家庭環境で使用することを目 的として いますが、この装置がラジオやテレビジョン受信機 に近接して使用されると、 受信障害を引き起こすこ とがあります。 取扱説明書に従って正しい取り扱い をして下さい。

Korea - 



%



 

 



















 

 



 

 

 

Safety

This product complies with EN/IEC/UL 60950-1, Safety of Information Technology Equipment.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states.

The WEEE marking on this product (see right) or its documentation indicates that the product must not be disposed of together with household waste. To prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area.

Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste. For more information, visit www.axis.com/techsup/commercial waste

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and firmware updates

find answers to resolved problems in the FAQ database. Search by product, category, or phrases

report problems to Axis support by logging in to your private support area.

Image 2
Contents Installation Guide Electromagnetic Compatibility EMC SafetyLegal Considerations Equipment ModificationsSafeguards TransportationBattery Replacement Dome Cover CleaningAxis P33/P33-V Network Camera Series Installation Guide Package contentsHardware overview Dimension HxWWeight Mount camera directly onto the wall Mount camera using a mounting bracket not includedMount the camera Axis P3346 Assign an IP address Method Recommended forSet the IP address manually optional Axis IP Utility single camera/ small installationAutomatic discovery Assign IP addresses in multiple devices Axis Camera Management multiple cameras/large installationsAssign an IP address in a single device Set the password Click the Create self-signed certificate buttonPower Line Frequency Access the video stream Adjust the Lens Complete the installation Other methods of setting the IP address Axis Video Hosting System AvhsUnit connectors Set the IP address with ARP/PingFunction Pin Specifications Relays and LEDs. Connected devices can be activated byLED indicators Color IndicationFurther information Resetting to the Factory Default SettingsAccessing the camera from the Internet Axis P33/P33-V Network Camera Series Installation Guide Mesures de sécurité TransportRemplacement des piles Nettoyer la bulle du dômeRemarques Série de caméras réseau Axis P33/P33-V Guide d’installationContenu de l’emballage Élément Modèles/variantes/remarquesPoids Dimensions H x lVue d’ensemble du matériel Montage de la caméra Montage de la caméra directement sur le murConduit métallique en option, non fourni ’exploitation Méthode Recommandée pour SystèmeAttribution d’une adresse IP Définir manuellement l’adresse IP optionnel Axis IP Utility Une seule caméra/petite installationDétection automatique Attribution dune adresse IP à un seul périphérique Attribution d’adresses IP à plusieurs périphériquesConfiguration du mot de passe Fréquence d’alimentation Accès aux flux de données vidéo Réglage de lobjectif Fin de linstallation Affichage des Autres méthodes de configuration de l’adresse IPRemarques Système ’exploitation UPnP PagesConnecteurs de l’appareil Définition de l’adresse IP à l’aide d’ARP/PingFonction Broc Remarques Caractéristiques Techniques Voyants lumineux Couleur IndicationPlus d’informations Réinitialisation des paramètres d’usine par défautAccès à la caméra par Internet Page Sicherheitsvorkehrungen Batteriewechsel Reinigung der KuppelabdeckungHinweise Axis P33/P33-V Netzwerk-Kamera-Serie InstallationsanleitungInhalt des Produktpakets Artikel Modelle / Varianten / NotizenAbmessungen H x B HardwareübersichtSeite GewichtMontieren der Kamera Kamera direkt an der Wand anbringenKabelführung aus Metall optional/nicht enthalten Zuweisen einer IP-Adresse Methode Empfohlen für BetriebssystemManuelle Zuweisung der IP-Adresse optional Axis IP Utility einzelne Kamera/kleine InstallationAutomatische Erkennung Axis Camera Management mehrere Kameras/große Installationen Zuweisen einer IP-Adresse für ein einzelnes GerätFestlegen des Kennworts Zuweisen von IP-Adressen für mehrere GeräteGeben Sie den Benutzernamen „root wie erforderlich ein Netzfrequenz Zugriff auf den Videostrom Anpassen des Objektivs Installation abschließen DHCP-Servers Andere Methoden zum Festlegen der IP-AdresseHinweise AnzeigenGeräteanschlüsse Zuweisen der IP-Adresse per ARP/PingTransistorausgang Zum Anschluss externer Geräte, wie Relais Funktion Kont Hinweise Spezifikationen AktLED-Anzeigen Farbe BedeutungZugriff auf die Kamera über das Internet Weitere InformationenSicurezza TrasportoSostituzione della batteria Pulizia della copertura a cupolaContenuto della confezione Elemento Modelli/varianti/notePagina Dimensioni HxLPanoramica dellhardware PesoMontaggio della telecamera Montaggio della telecamera direttamente sulla pareteCanalina in metallo opzionale/non inclusa Assegnazione di un indirizzo IP Metodo Consigliato perAssegnazione manuale dell’indirizzo IP facoltativa Axis IP Utility telecamera singola/piccole installazioniRilevamento automatico Assegnazione degli indirizzi IP a più videocamere Axis Camera Management più telecamere/grandi installazioniAssegnazione di un indirizzo IP a una singola videocamera Selezionare Assign the following IP address Assegna ilImpostazione della password Frequenza linea elettrica Accesso al flusso video Regolazione dellobiettivo Completamento dellinstallazione Del server Dhcp Altri metodi di impostazione dellindirizzo IPUtilizzo nel Connettori Impostazione dellindirizzo IP con ARP/PingFunzione Pin Specifiche VCCIndicazione Indicatori LEDColore Ulteriori informazioni Accesso alla telecamera da InternetRipristino delle impostazioni predefinite Page Medidas preventivas TransporteSustitución de la batería Limpieza de la cubierta del domoArtículo Modelos/variantes/notas Contenido del paqueteNotas Página Dimensiones Alt. x AnchPresentación del hardware Montaje de la cámara Montaje de la cámara directamente en la paredConducto metálico opcional/no incluido Asignación de la dirección IP Método Recomendado paraConfiguración manual de la dirección IP opcional Detección automáticaAsignación de una dirección IP en un dispositivo individual Seleccione Assign the following IP address Asignar laConfiguración de la contraseña Asignación de direcciones IP en varios dispositivosAxis P3346-V/AXIS P3367-V Frecuencia de la línea de alimentación Acceso a la transmisión de vídeo Ajuste del objetivo Finalización de la instalación Otros métodos para configurar la dirección IP Configuración de la dirección IP con ARP/Ping ConectoresFunción Pin Notas Especificaciones Color Indicación Indicadores LEDPágina Más información Restablecimiento de los valores inicialesAcceso a la cámara desde Internet Page Axis Communications AB
Related manuals
Manual 64 pages 20.49 Kb