Axis Communications P3346-V manual Axis Camera Management multiple cameras/large installations

AXIS P33/P33-V Network Camera Series Installation Guide Page 11

AXIS Camera Management - multiple cameras/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection status, manage firmware upgrades and set IP addresses.

ENGLISH

Automatic discovery

1.Check that the camera is connected to the network and that power has been applied.

2.Start AXIS Camera Management. When the camera appears in the window, right-click the link and select Live View Home Page.

3.See page 12 for instructions on how to set the password.

Assign an IP address in a single device

1.Select AXIS P3346/AXIS P3346-V/AXIS P3367-V/AXIS P3384-V in AXIS Camera Management and click the Assign IP button

.

2.Select Assign the following IP address and enter the IP address, the subnet mask, and default router the device will use.

3.Click OK.

Assign IP addresses in multiple devices

AXIS Camera Management speeds up the process of assigning IP addresses to multiple devices, by suggesting IP addresses from a specified range.

1. Select the devices you wish to configure (different models can be

selected) and click the Assign IP button .

2.Select Assign the following IP address range and enter the range

of IP addresses, the subnet mask, and default router the devices will use.

3.Click the OK button.