Axis Communications P1353, P1354 manual Legal Considerations, Korea 

Page 2

Legal Considerations

Video and audio surveillance can be prohibited by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product includes one (1) H.264 decoder license, and (1) AAC decoder license. To purchase further licenses, contact your reseller.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill applicable standards for:

Radio frequency emission when installed according to the instructions and used in its intended environment.

Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA - This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Canada - This Class B digital apparatus complies with Canadian ICES-003.

Europe - This digital equipment fulfills the requirements for RF emission according to the Class B limit of EN 55022.

This product fulfills the requirements for immunity according to EN 55024 residential and commercial environments. Australia - This digital equipment fulfills the requirements for RF emission according to the Class B limit of AS/NZS CISPR 22.

Japan - この装置は、クラスB 情報技術装置です。 この装置は、家庭環境で使用することを目 的として いますが、この装置がラジオやテレビジョン受信機 に近接して使用されると、 受信障害を引き起こすこ とがあります。 取扱説明書に従って正しい取り扱い をして下さい。

Korea - 



%



 

 



















 

 



 

 

 

Safety

This product complies with EN/IEC/UL 60950-1, Safety of Information Technology Equipment.

About this Document

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and documentation without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

RoHS

This product complies with both the European RoHS directive, 2002/95/EC, and the Chinese RoHS regulations, ACPEIP.

WEEE Directive

The European Union has enacted a Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE Directive). This directive is applicable in the European Union member states. The WEEE marking on this product (see right) or its documentation indicates that the product must not

be disposed of together with household waste. To prevent possible harm to human health and/or the environment, the product must be disposed of in an approved and environmentally safe recycling process. For further information on how to dispose of this product correctly, contact the product supplier, or the local authority responsible for waste disposal in your area. Business users should contact the product supplier for information on how to dispose of this product correctly. This product should not be mixed with other commercial waste.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

download user documentation and firmware updates

find answers to resolved problems in the FAQ database. Search by product, category, or phrases

report problems to Axis support by logging in to your private support area.

chat with Axis support staff (selected countries only)

visit Axis Support at www.axis.com/techsup/

Contact Information

Axis Communications AB

Emdalavägen 14

223 69 Lund

Sweden

Tel: +46 46 272 18 00

Fax: +46 46 13 61 30

www.axis.com

This document includes instructions for installing

AXIS P1353/P1354 on your network. Previous experience of networking will be beneficial when installing the product.

Image 2
Contents Installation Guide Legal Considerations Korea Safeguards TransportationBattery Replacement Installation steps Package contentsHardware overview Dimensions Install the hardwareAccess the Video Stream Model W x D WeightAdjust zoom and focus Focus Assistant Description Unit connectorsFunction Function Pin Specifications Function Pin Status LED when using the Focus Assistant Color IndicationFurther Information Resetting to the factory default settingsWarranty Mesures de sécurité TransportRemplacement des piles Élément Modèles/variantes/remarques Procédure d’installationContenu de l’emballage Vue d’ensemble du matériel Branchement des câbles Installation du matérielAccès aux flux de données vidéo Modèle W x D PoidsResserrez les commandes de zoom et de mise au point Réglage du zoom et de la mise au pointAssistant de mise au point Continuez avec les étapes 6 à 8 de la Description Broche Connecteurs de l’appareilFonction Sortie numérique Permet de connecter des Remarques Caractéristiques TechniquesMax 50 mA Fonction Broche Remarques Voyants lumineux Couleur IndicationRétablissement des paramètres d’usine par défaut Plus d’informations GarantieSicherheitsvorkehrungen Batteriewechsel Artikel Modelle / Varianten / Hinweise InstallationsschritteLieferumfang Hardware-Übersicht Abmessungen Installieren Sie die HardwareZugriff auf den Videostrom Anschließen der KabelStellen Sie Zoom und Bildschärfe ein HinweiseFokus-Assistent Seite Geräteanschlüsse Funktion Anschluss Bedeutung NummerEr als Schnittstelle für Funktion Pol Hinweise SpezifikationenMax 50 mA Funktion Pol Hinweise Farbe Bedeutung LED-AnzeigenStatus-LED bei Verwendung des Fokus-Assistenten Weitere Informationen Garantie Wiederherstellen der werkseitigen StandardeinstellungenSicurezza TrasportoSostituzione della batteria Elemento Procedura di installazioneContenuto della confezione Panoramica dellhardware Dimensioni Installazione dellhardwareAccesso al Flusso Video Collegamento dei caviRegolazione dello zoom e della messa a fuoco Levetta zoom Levetta di messa a fuoco Pagina Connettori Funzione Numero Descrizione PinUscita digitale Per collegare dispositivi esterni Funzione Pin SpecificheMax 50 mA Funzione Pin Indicatori LED LED di stato durante luso di Focus AssistantRipristino delle impostazioni predefinite Ulteriori Informazioni GaranziaMedidas preventivas TransporteSustitución de la batería Artículo Modelos/variantes/notas Contenido del paquetePasos para la instalación Presentación del hardware Conector RS485/422Acceso a la transmisión de vídeo DimensionesInstalación del hardware Conexión de los cablesAjuste del zoom y el enfoque Apriete de nuevo los botones del zoom y de enfoqueAsistente de enfoque Continúe con los pasos 6 8 en la página Descripción Pines ConectoresFunción Función Pines Notas Especificaciones Max 50 mA Función Pines Notas Color Indicación Indicadores LEDLED de estado al utilizar el Asistente de enfoque LED de Color Indicación EstadoRestablecimiento de los valores iniciales Más información GarantíaPage Ver