AutoDome 700 Series IP PTZ Camera | Configuring the AutoDome 700 Series en 23 |
|
|
CAUTION!
Do not use any special characters, for example &, in the name.
Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording.
You can use the second line for entering additional characters; these can be selected from a table.
1.Click the icon next to the second line. A new window with the character map is opened.
2.Click the required character. The character is inserted into the Result field.
3.In the character map, click the << and >> icons to move between the different pages of the table, or select a page from the list field.
4.Click the < icon to the right of the Result field to delete the last character, or click the X icon to delete all characters.
5.Now click the OK button to apply the selected characters to the second line of the Camera 1 parameters. The window will close.
Initiator extension
You can attach your own text to the initiator name of the AutoDome 700 Series to make the unit easier to identify in large iSCSI systems. This text is added to the initiator name, separated from it by a full stop. You can see the initiator name in the System Overview page.
4.10Password
An AutoDome 700 Series is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access.
NOTICE!
Proper password protection is only guaranteed when all higher authorization levels are also protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.
Password
The AutoDome 700 Series operates with three authorization levels: service, user and live. The highest authorization level is service. After entering the correct password, you can access all the functions of the AutoDome 700 Series and change all configuration settings.
With the user authorization level, you can operate the unit and also control cameras, for example, but you cannot change the configuration.
The lowest authorization level is live. It can only be used to view the live video image and switch between the different live image displays.
You can define and change a password for each authorization level if you are logged in as service or if the unit is not password protected.
Enter the password for the appropriate authorization level here.
Confirm password
In each case, enter the new password a second time to eliminate typing mistakes.
NOTICE!
A new password is only saved when you click the Set button. You should therefore click the Set button immediately after entering and confirming a password.
Bosch Security Systems, Inc. | User Manual | F.01U.215.777 1.0 2011.07 |