58 en Configuring the AutoDome 700 Series | AutoDome 700 Series IP PTZ Camera |
|
|
4.52Encryption
A special license, with which you will receive a corresponding activation key, is required to encrypt user data. You can enter the activation key to release the function on the Licenses page (see Section 4.55 Licenses, page 59).
4.53Advanced Mode: Service
4.54Maintenance
Firmware
The AutoDome 700 Series is designed in such a way that its functions and parameters can be updated with firmware. To do this, transfer the current firmware package to the unit via the selected network. It will then be automatically installed there.
In this way, an AutoDome 700 Series can be serviced and updated remotely without a technician having to change the installation on site.
CAUTION!
Before launching the firmware upload make sure that you have selected the correct upload file. Uploading the wrong files can result in the unit no longer being addressable, in which case you must replace the unit.
You should never interrupt the installation of firmware. An interruption can lead to the flash- EPROM being incorrectly programmed. This in turn can result in the unit no longer being addressable, in which case it will have to be replaced. Even changing to another page or closing the browser window leads to an interruption.
F.01U.215.777 1.0 2011.07 | User Manual | Bosch Security Systems, Inc. |