AutoDome 700 Series IP PTZ CameraUsing the AutoDome 700 Series en 13
2.5.1Entering a Keyboard Control Command
The Aux Control tab is used to enter keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show Shot, Set Shot Aux On or Aux Off). A valid combination either issues a command to the camera or displays an on- screen menu.
Aux Control Tab
The Aux Control tab is used to enter
To access the Aux Control tab, navigate to the Livepage and click the Aux Control tab (see Figure 2.3 below).
Figure 2.3 Aux Control Tab
1 | Command number field |
2 | Keypad (numbers |
3 | Show a preset shot |
4 | Set a preset shot |
5 | Initiates a command |
6 | Deletes a number in the Command Number field |
7 | Used to select a menu item |
8Stops a command
To Enter a Keyboard Control Command:
1.Place the cursor in the Command Number field.
2.Click the desired command number via the
3.Click either the Aux On or the Aux Off button to initiate or stop the command.
4.If the command initiates a menu, use the Up/Down arrows on the View Control to navigate the menu. Click the Focus or Iris button to select a menu item.
To Set a Preset Shot:
Preset shots (or scenes) are camera positions that are saved in memory for future use.
1.Move your cursor over the live image and wait for the area to display a directional arrow.
2.Click and hold a mouse button to pan to the desired position you want to save.
3.Click any number combination from
4.Click the Set Shot button. The image area displays a message that indicates which shot number was saved.
To View a Preset Shot:
1.Click the number of the scene you want to view using the
2.Click the Show Shot button.
NOTICE!
For more information about the AutoDome 700 Series settings and controls, click the Help on this page? link to open the AutoDome 700 Series online help.
Bosch Security Systems, Inc. | User Manual | F.01U.215.777 1.0 2011.07 |