8 | en Using the AutoDome 700 Series | AutoDome 700 Series IP PTZ Camera |
|
|
|
NOTICE!
You can also use the Bosch Video Client utility to configure the network settings for an AutoDome 700 Series camera. Go to www.boschsecurity.com to download the Configuration Manager software and Operating Manual.
2.4 | Configuring the AutoDome 700 Series Camera |
To operate the camera in your network you must assign it a valid network IP address. The default IP address is 192.168.0.1, but you may have to change this address if it conflicts with another device on your network. Refer to Section 4.3 Basic Mode: Network, page 20 for more information.
To properly configure the camera for your network, you need the following information:
–Unit IP address: An identifier for the camera on a TCP/IP network. For example, 140.10.2.110 is a valid syntax for an IP address.
–Subnet mask: A mask used to determine what subnet an IP address belongs to.
–Gateway IP address: A node on a network that serves as an entrance to another network.
–Port: An endpoint to a logical connection in TCP/IP and UDP networks. The port number identifies the use of the port for use through a firewall connection.
NOTICE!
Ensure that the network parameters of your cameras are available before you begin configuration.
The AutoDome 700 Series defaults are as follows:
–IP Address: 192.168.0.1
–Subnet Mask: 255.255.255.0
–Gateway IP Address: 0.0.0.0
The following sections provide instructions about installing the software necessary to view images over an IP connection, configuring the IP network settings and accessing the AutoDome 700 Series images from a Web browser.
2.4.1Changing the Network Settings
The AutoDome 700 Series has a default IP address of 192.168.0.1. To change the IP address or any network settings, you can use the Configuration Manager software or the AutoDome 700 Series server.
NOTICE!
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address.
Using the Configuration Manager
Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes.
NOTICE!
Depending on the PC network security settings, the user may have to add the new IP address to the browser’s trusted sites list for the IP AutoDome controls to operate.
F.01U.215.777 1.0 2011.07 | User Manual | Bosch Security Systems, Inc. |