AutoDome 700 Series IP PTZ Camera | Configuring the AutoDome 700 Series en 25 |
|
|
4.12Display Stamping
Various overlays or “stamps” in the video image provide important supplementary information. These overlays can be enabled individually and are arranged on the image in a clear manner.
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the Top, at the Bottom or at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.
1.Select the desired option from the list.
2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).
3.In the Position (XY) fields, enter the values for the desired position.
Time stamping
This field sets the position of the time overlay. It can be displayed at the Top, at the Bottom or at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.
1.Select the desired option from the list.
2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).
3.In the Position (XY) fields, enter the values for the desired position.
Display milliseconds
If necessary, you can also display milliseconds. This information can be useful for recorded video images; however, it does increase the processor's computing time. Select Off if you do not need to display milliseconds.
Alarm mode stamping
Select On to display a text message overlay in the image in the event of an alarm. It can be displayed at a position of your choice that you can then specify using the Custom option. Or it can be set to Off for no overlay information.
1.Select the desired option from the list.
2.If you select the Custom option, additional fields are displayed where you can specify the exact position (Position (XY)).
3.In the Position (XY) fields, enter the values for the desired position.
Alarm message
Enter the message to be displayed in the image in the event of an alarm. The maximum text length is 31 characters.
Title OSD
Select On to continuously display sector or shot title overlays in the image. Select Momentary to display sector or shot title overlays for a few seconds. OSD titles can be displayed at a position of your choice, or it can be set to Off for no overlay information.
1.Select the desired option from the list.
2.Specify the exact position (Position (XY)).
3.In the Position (XY) fields, enter the values for the desired position.
Bosch Security Systems, Inc. | User Manual | F.01U.215.777 1.0 2011.07 |