Bosch Appliances VG5 700 series user manual Sectors, Miscellaneous, Logs, Audio

Page 38

38 en Configuring the AutoDome 700 Series

AutoDome 700 Series IP PTZ Camera

 

 

4.27Sectors

Sector

The AutoDome 700 Series pan capability is 360° and is divided into 16 equal sectors. This section allows you to apply a title for each sector and to designate any sectors as a Blanked Sector.

To define a title for sectors:

1.Place the cursor in the input box to the right of the sector number.

2.Type a title for the sector, up to 20 characters long.

3.To blank the sector, click the check box to the right of the sector title.

4.28Miscellaneous

Address

Allows the appropriate dome to be operated via the numerical address in the control system. Type a number between 0000 and 9999, inclusive, to identify the camera.

4.29Logs

To save the log file information:

1.Click Download to obtain the log information.

2.Click Save.

3.Navigate to the directory in which you want to store the log information.

4.Type a name for the log file and click Save.

4.30Audio

You can set the gain of the audio signals to suit your specific requirements. The current video image is shown in the small window next to the slide controls to help you check the audio source and improve assignments. Your changes are effective immediately.

If you connect via Web browser, you must activate the audio transmission on the Livepage Functions page (see Section 2.5 The Livepage, page 10). For other connections, the transmission depends on the audio settings of the respective system.

Audio

The audio signals are sent in a separate data stream parallel to the video data, and so increase the network load. The audio data are encoded according to G.711 and require an additional bandwidth of approx. 80 kbps for each connection. If you do not want any audio data to be transmitted, select Off.

Line In

You can set the line input gain. Make sure that the display does not go beyond the green zone during modulation.

Record Format

Select a format for audio recording. The default value is G.711. Select L16 if you want better audio quality with higher sampling rates. This requires approx. eight times the G.711 bandwidth.

F.01U.215.777 1.0 2011.07

User Manual

Bosch Security Systems, Inc.

Image 38
Contents AutoDome 700 Series IP PTZ Camera Page Table of Contents Troubleshooting Guide User Command Table IndexEstablishing AutoDome Control Powering OnGetting Started Seconds and ends with a firmware version screenSystem Requirements Using the AutoDome 700 SeriesOverview of Features Connecting the AutoDome 700 Series to the PC Installation manualConfiguring the AutoDome 700 Series Camera Using the Configuration ManagerUsing the AutoDome 700 Series Web Server Network SettingsMaximum Number of Connections 5The LivepageDisplay Stamping Image Selection Protected AutoDome 700 SeriesProtected Network View ControlSystem Log / Event Log Digital I/OTriggering Relay To View a Preset Shot To Enter a Keyboard Control CommandTo Set a Preset Shot Aux Control TabRecording Video Sequences Image ResolutionSaving Snapshots Processor LoadContact Description Audio Line Input SpecificationsVG5 Audio Connections Activating Audio Reception Enabling Audio Transmission Navigation Configuring the AutoDome 700 SeriesStarting Configuration Making ChangesBasic Mode Device Access Basic Mode Date/TimeBasic Mode Network Page Basic Mode System Overview Basic Mode AudioBasic Mode Recording Advanced Mode GeneralPassword Initiator extensionDevice date/Device time Date/TimeDate format Device time zoneDisplay Stamping Advanced Mode Web Interface Appearance Livepage Functions Encoder Profile Advanced Mode Camera Installer MenuLogging Bosch Security Systems, Inc 01U.215.777 1.0 Profile name Video resolutionExpert Settings Target data rateEncoder Streams Jpeg stream Privacy MasksPreview Camera Settings Night Mode Threshold High Sensitivity Setting StabilizationNight Mode ShutterLens Settings PTZ Settings DiagnosticsTo define a preposition tour Preposition and ToursTo define and edit an individual scene Logs SectorsMiscellaneous AudioAdvanced Mode Recording Storage Management Formatting Storage Media Deactivating Storage MediaRecording Profiles Recording Schedule Virtual alarmRetention Time Recording includesRecording Status Destination password Advanced Mode Alarm Alarm ConnectionsConnect on alarm Number of destination IP addressVideo output Video transmissionRemote port Decoder39 VCA VCA configurationAlarm status VCA ProfilesMinimum object size MOTION+ only Motion detector MOTION+ onlySensitivity MOTION+ only Select Area MOTION+ onlySensitivity Trigger delay sTamper detection Global changeAudio Alarm Alarm E-Mail Alarm Task Editor Alarm RulesRelay Advanced Mode Interfaces Alarm InputsAdvanced Mode Network Network Access Http browser port Automatic IP assignmentDNS server address Https browser portRCP+ port Interface mode ETHEnable DynDNS Telnet supportAdvanced UPnP EnableMulticast TCP Metadata PortFTP Posting Firmware Advanced Mode Service MaintenanceEncryption Upload LicensesSystem Overview DownloadIf O.K., then If there is power to the AutoDome, then Troubleshooting GuideIf O.K., then If using a non-Bosch power supply VG5 AutoDome Operation and Control3VG5 Series AutoDome Audio Problem Solution No NetworkVG5 700 Series AutoDome Video and Control ConnectionProblem Solution No Audio Problem Solution If O.K., then Poor AudioUser Command Table Symbols IndexJpeg Vidos Page Page Page Page Page Page Bosch Security Systems, Inc