24 en Connection and | FlexiDome2X |
|
|
4.Navigation buttons (5)
5.Focal length
6.Focus
A.
B.
C.
The physical default position of the camera is that the top of the image corresponds to the indication TOP.
CAUTION!
CCD image sensors are highly sensitive and require special care
!for proper performance and extended lifetime. Do not expose them to direct sunlight or bright spotlights in operating and
The camera module position can be adjusted along three axes. When adjusting the camera position, ensure that the picture display on the monitor is level. Set the camera to the desired position by performing the following steps:
–For horizontal adjustment along the pan axis (A), rotate the camera module in the base. Do not rotate more than 360°.
–To obtain a horizontal horizon (for tilted ceilings or sidewall mounting), rotate the base of the lens along the twist axis (C) to align the picture shown on the monitor. Do not rotate more than 340°.
–For vertical adjustment along the tilt axis (B), loosen thumbwheels, position camera, then gently tighten thumbwheels to secure camera. Do not rotate more than 90°.
| Installation Manual | Bosch Security Systems |