Bosch Security Systems
5.2 Pre-defined modes
There are six pre-defined modes with settings to make configuration easier. You can select one of the six pre-defined modes in the Install/Mode submenu. The modes are defined as follows:
1. 24-hour
Default installation mode to provide stable pictures over a 24-hour period. These settings are optimized for out-of- the-box installation.
2. Traffic
Capture high-speed objects using default shutter in variable lighting conditions.
3. Low light
Provide extra enhancement, such as AGC and SensUp to make usable pictures in low-light conditions.
4. Smart BLC
Settings optimized to capture details in high contrast and extremely bright-dark conditions.
5. Low noise
Enhancements are set to reduce picture noise. Useful for conditional refresh DVR and IP storage systems because reducing noise reduces the amount of storage required.
6. Analog systems
Use this mode if the camera is connected to a purely analog system (e.g. matrix switcher with VCR) or to a CRT monitor. Useful mode for evaluating/demonstrating the camera when it is directly connected to a CRT monitor.
30 en Configuration
FlexiDome2X
| Installation Manual |