Axis Communications AXIS Q1614 user manual Audio Clips, Audio Output

Page 29

AXIS Q1614 Network Camera

Video and Audio

Use the Encoding option to select digital audio encoding format.

AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality is a priority, AAC is the recommended codec to use. An AAC license is included in the Axis product.

G711 is an unlicensed standard codec that is useful when integrating audio into a VoIP system

G726 is an unlicensed speech codec that is most commonly used within the security industry.

Note

If recording audio to edge storage, such as an SD card or network share, use AAC encoding.

The Sample rate defines the number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but also requires a greater bandwidth.

Set the required Bit rate depending on the selected encoding. A higher bit rate will give better audio quality. A lower bit rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online help .

Audio Output

An external speaker can be connected to the Audio-out connector (a built-in amplifier is required for this). The output can be connected to another amplifier with speakers. A stereo connector must be used for the audio out.

Configure the audio output settings under Video & Audio > Audio Settings.

Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the sound is too high, choose a lower dB.

Audio Clips

An audio clip is a sound file that can be played when events occur or directly from the Live View page. The audio clip must first be uploaded to the Axis product or recorded by a microphone connected to the product.

To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips. For more information see the online help.

To configure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see Events on page 40.

Note

Audio clips cannot be used if the product’s audio functionality is enabled. The audio functionality is enabled on the Audio tab under Video & Audio > Video Stream.

29

Image 29
Contents Axis Q1614 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1614 Network Camera Table of ContentsConnectors Technical SpecificationsStorage Ports Maintenance Support Advanced Hardware Overview Connectors and ButtonsFor technical specifications, see Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplace the Lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1614 Network Camera Access from a Browser Access the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode PTZ ModeSet Power Line Frequency Live ViewControls on the Live View Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Axis Media Control viewer toolbarPTZ Controls Axis Q1614 Network Camera Axis Media Control AMC How to Stream H.264Media Streams QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsFocus Adjustment Set Up the ProductBasic Setup Video Stream Video and AudioPixel Counter Image264 Click Save to apply the new settingsStream Profiles Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Exposure Settings Lightfinder ModeImage Appearance White BalanceIris adjustment Iris configurationSet Shutter to Day/NightView Area To configure the view areaOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Overlay ImageUse Overlay Text in an Action Rule Focus Privacy MaskGo to Events Action Rules BasicAudio Input Audio SettingsAudio Modes Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourDevice Settings Install PTZ DriverAdvanced Control QueueOperator Same as administrator but with lower priority Camera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1614 Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemAdd Recipients Set Up Email RecipientsActions PTZ ControlCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddFind Recordings RecordingsPlay Recording Go to Recordings ListContinuous Recording Export Video ClipTo play a recording, follow these steps Go to Recordings ContinuousLanguages Security System OptionsUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Bonjour StorageSD Card Mount and Unmount SD CardNetwork Share Under General Settings, select Autoformat toTo add a network share Go to System Options Storage Click Network SharePorts MaintenanceSupport Overview SupportSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications AudioAudio input Audio outputPower Function/group Specifications Video bufferConnectors WeightFunction/group Specifications Warranty ConnectorsConnector Function Pin SpecificationsPerformance Considerations RS485/422 ConnectorOutput Function PinAxis Q1614 Network Camera M4.4