Axis Communications AXIS Q1614 user manual Ports, Maintenance

Page 57

AXIS Q1614 Network Camera

System Options

I/O Ports

The Axis product provides two configurable input and output ports for connection of external devices. For information about how to connect external devices, see Connectors on page 67.

The I/O ports are configured under System Options > Ports & Devices > I/O Ports. Select the port direction (Input or Output). The ports can be given descriptive names and their Normal states can be configured as Open circuit or Grounded circuit.

I/O Ports

The Axis product provides two configurable input and output ports for connection of external devices. For information about how to connect external devices, see Connectors on page 67.

COM Port

The Axis product has one RS-485/RS-422 serial port. The port supports the following modes:

Generic HTTP allows the Axis product to receive data and send commands via HTTP.

Pan Tilt Zoom is used to control a PTZ device. The PTZ device requires a driver. See Install PTZ Driver for more information. Drivers can be downloaded from www.axis.com

Generic TCP/IPallows the Axis product to receive data and send commands via TCP/IP. Daisy chain server - Allows Daisy chain clients to communicate with the Axis product.

Select the desired Port Type from the drop-down list. For more information on Serial Port Settings and Daisy Chain Port Settings

see the online help .

Port Status

The list on the System Options > Ports & Devices > Port Status page shows the status of the product’s input and output ports.

Accelerometer

The leveling assistant that helps to level the camera is enabled by default. To disable it, de-select the Enable leveling assistant option from System Options > Ports & Devices > Accelerometer and click Save. To refresh the page and view the saved setting, click Reset.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Note

A restart clears all entries in the Server Report.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

the boot protocol (DHCP or static)

the static IP address

the default router

the subnet mask

the system time

the IEEE 802.1X settings

57

Image 57
Contents Axis Q1614 Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis Q1614 Network Camera Table of ContentsTechnical Specifications Storage Ports Maintenance Support AdvancedConnectors Connectors and Buttons For technical specifications, seeHardware Overview Connector Network ConnectorPower Connector Audio ConnectorStatus LED Behavior for Focus Assistant LED IndicatorsFunction Button Color IndicationReplace the Lens Buzzer Signal for Focus AssistantBuzzer LensAxis Q1614 Network Camera Access from a Browser Access the ProductAccess from the Internet Set the Root PasswordConfigure Capture Mode PTZ ModeSet Power Line Frequency Live ViewControls on the Live View Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewAxis Media Control viewer toolbar PTZ ControlsAMC Audio Controls Axis Q1614 Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsSet Up the Product Basic SetupFocus Adjustment Video Stream Video and AudioPixel Counter ImageClick Save to apply the new settings Stream Profiles264 Camera Settings Capture ModeGo to Setup Video & Audio Camera Settings Exposure Settings Lightfinder ModeImage Appearance White BalanceIris adjustment Iris configurationSet Shutter to Day/NightView Area To configure the view areaOverlay Go to Video & Audio Video Stream and select the Image tabOverlay Image Use Overlay Text in an Action RuleGo to Video & Audio Overlay Image Focus Privacy MaskGo to Events Action Rules BasicAudio Settings Audio ModesAudio Input Audio Output Audio ClipsDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom Guard TourDevice Settings Install PTZ DriverAdvanced Control QueueOperator Same as administrator but with lower priority Camera Tampering DetectorsMotion Detection Shock DetectionMotion Detection Parameters Set Up Motion Detection WindowsGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Go to Setup Applications Install ApplicationApplications Application LicensesAxis Q1614 Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemAdd Recipients Set Up Email RecipientsActions PTZ ControlCreate Schedules Set Up RecurrencesTo create a new schedule Go to Events Schedules and click AddFind Recordings RecordingsPlay Recording Go to Recordings ListContinuous Recording Export Video ClipTo play a recording, follow these steps Go to Recordings ContinuousLanguages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates To install a self-signed certificateClick Install certificate and upload the certificate Date & TimeNetwork Basic TCP/IP SettingsAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTMRTP/H.264 Bonjour StorageSD Card Mount and Unmount SD CardNetwork Share Under General Settings, select Autoformat toTo add a network share Go to System Options Storage Click Network SharePorts MaintenanceSupport Overview SupportSystem Overview Logs & ReportsReset to Factory Default Settings Plain ConfigFile Upload Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Setup Video & Audio Camera SettingsStorage and disk management problems SettingsNo audio Poor audio qualityTechnical Specifications Specification Network Security Function/group Specifications AudioAudio input Audio outputPower Function/group Specifications Video bufferConnectors WeightFunction/group Specifications Warranty ConnectorsConnector Function Pin SpecificationsPerformance Considerations RS485/422 ConnectorOutput Function PinAxis Q1614 Network Camera M4.4