Axis Communications AXIS Q1614 LED Indicators, Status LED Behavior for Focus Assistant, Color

Page 8

AXIS Q1614 Network Camera

Hardware Overview

•Connecting to AXIS Internet Dynamic DNS Service. See page 51. To connect, press and hold the button for about 3 seconds.

Function Button

The function button has multiple functions:

•Levelling assistant – This function helps to ensure the camera is level. Press the button for about 3 seconds to start the levelling assistant and press again to stop the leveling assistant. The status LED (see page 9 ) and buzzer signal (see page 9 ) assist levelling of the camera. The camera is level when the buzzer beeps continuously.

•Focus assistant – This function is used for enabling the Focus Assistant. To enable the focus assistant, press and very quickly release the button. Press again to stop the focus assistant. For more information, see the Installation Guide.

LED Indicators

LED

Color

Indication

 

 

 

Network

Green

Steady for connection to a 100 Mbit/s network. Flashes for network activity.

 

 

 

 

Amber

Steady for connection to a 10 Mbit/s network. Flashes for network activity.

 

 

 

 

Unlit

No network connection.

 

 

 

Status

Green

Steady green for normal operation.

 

 

 

 

Amber

Steady during startup and when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

•The Power LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports

&Devices > LED. See the online help for more information.

•The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

Status LED Behavior for Focus Assistant

Color

Green

Amber

Red

Indication

Focus Assistant is enabled

The lens is optimally adjusted

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is less optimally adjusted.

The camera has been moved, or an object has been inserted in front of the lens. Exit and restart the Focus Assistant.

The lens is poorly adjusted.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Axis Q1614 Network Camera About this Document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis Q1614 Network CameraConnectors Technical SpecificationsStorage Ports Maintenance Support Advanced Hardware Overview Connectors and ButtonsFor technical specifications, see Network Connector ConnectorPower Connector Audio ConnectorLED Indicators Status LED Behavior for Focus AssistantFunction Button Color IndicationBuzzer Signal for Focus Assistant Replace the LensBuzzer LensAxis Q1614 Network Camera Access the Product Access from a BrowserAccess from the Internet Set the Root PasswordPTZ Mode Configure Capture ModeSet Power Line Frequency Live ViewGo to Setup Events Controls on the Live ViewManual Trigger To show the manual trigger buttons in the Live ViewAMC Audio Controls Axis Media Control viewer toolbarPTZ Controls Axis Q1614 Network Camera Axis Media Control AMC How to Stream H.264Media Streams Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccess Audio Streams Java applet supports simplex audio with G.711 encodingFocus Adjustment Set Up the ProductBasic Setup Video and Audio Video StreamPixel Counter Image264 Click Save to apply the new settingsStream Profiles Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Lightfinder Mode Exposure SettingsImage Appearance White BalanceIris configuration Iris adjustmentSet Shutter to Day/NightTo configure the view area View AreaOverlay Go to Video & Audio Video Stream and select the Image tabGo to Video & Audio Overlay Image Overlay ImageUse Overlay Text in an Action Rule Privacy Mask FocusGo to Events Action Rules BasicAudio Input Audio SettingsAudio Modes Audio Clips Audio OutputConfigure the Live View Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionGo to Setup Live View Config User Defined LinksOutput Buttons For more information about I/O ports, see I/O Ports onPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom Guard TourInstall PTZ Driver Device SettingsAdvanced Control QueueOperator Same as administrator but with lower priority Detectors Camera TamperingMotion Detection Shock DetectionSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionAudio Detection Install Application Go to Setup ApplicationsApplications Application LicensesAxis Q1614 Network Camera Set Up Action Rules EventsTriggers Go to Events Action Rules and click AddInput Signal HardwareStorage SystemSet Up Email Recipients Add RecipientsActions PTZ ControlSet Up Recurrences Create SchedulesTo create a new schedule Go to Events Schedules and click AddRecordings Find RecordingsPlay Recording Go to Recordings ListExport Video Clip Continuous RecordingTo play a recording, follow these steps Go to Recordings ContinuousLanguages System Options SecurityUsers IP Address FilterGo to System Options Security Ieee IeeeCertificates To install a self-signed certificate Go to Setup System Options Security CertificatesClick Install certificate and upload the certificate Date & TimeBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Axis Internet Dynamic DNS ServiceAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationNTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMUPnPTM Storage BonjourSD Card Mount and Unmount SD CardUnder General Settings, select Autoformat to Network ShareTo add a network share Go to System Options Storage Click Network ShareMaintenance PortsSupport Support OverviewSystem Overview Logs & ReportsFile Upload Reset to Factory Default SettingsPlain Config Troubleshooting Upgrade the FirmwareEmergency Recovery Procedure Check the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externallyProblems with streaming H.264 Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsSettings Storage and disk management problemsNo audio Poor audio qualityTechnical Specifications Function/group Specifications Audio Specification Network SecurityAudio input Audio outputFunction/group Specifications Video buffer PowerConnectors WeightConnectors Function/group Specifications WarrantyConnector Function Pin SpecificationsRS485/422 Connector Performance ConsiderationsOutput Function PinAxis Q1614 Network Camera M4.4
Top Page Image Contents