Axis Communications AXIS Q1614 Storage, Bonjour, Mount and Unmount SD Card, Format SD Card

Page 55

AXIS Q1614 Network Camera

System Options

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating systems and clients that support this protocol.

Bonjour can be disabled under System Options > Network > Bonjour.

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

Note

For SD card recommendations see www.axis.com

Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 10.

The following SD card file systems are supported:

•ext4 — recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•vFAT — supported by most operating systems for personal computers.

The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management.

If the card’s status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option is only available for SD cards with ext4. For SD cards with vFAT, use a card reader or computer to troubleshoot the card.

To avoid filling the card, it is recommended to remove recordings continuously. Under General Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the card and protect recordings from being removed, select Lock under General Settings.

Mount and Unmount SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started. A manual mount is only required if the card has been unmounted and not ejected and re-inserted.

To unmount the SD card:

1.Open the Axis product’s webpages and go to Setup > System Options > Storage.

2.Click SD Card.

3.Click Unmount.

4.The card can now be removed.

Format SD Card

NOTICE

Formatting the SD card will remove all data and recordings stored on the card.

55

Image 55

Contents Axis Q1614 Network Camera Intellectual Property Rights About this DocumentLegal Considerations LiabilityLearn More SupportAxis Q1614 Network Camera Table of ContentsStorage Ports Maintenance Support Advanced Technical SpecificationsConnectors For technical specifications, see Connectors and ButtonsHardware Overview Audio Connector Network ConnectorConnector Power ConnectorColor Indication LED IndicatorsStatus LED Behavior for Focus Assistant Function ButtonLens Buzzer Signal for Focus AssistantReplace the Lens BuzzerAxis Q1614 Network Camera Set the Root Password Access the ProductAccess from a Browser Access from the InternetLive View PTZ ModeConfigure Capture Mode Set Power Line FrequencyTo show the manual trigger buttons in the Live View Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarAMC Audio Controls Axis Q1614 Network Camera Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Access Audio StreamsBasic Setup Set Up the ProductFocus Adjustment Image Video and AudioVideo Stream Pixel CounterStream Profiles Click Save to apply the new settings264 Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings White Balance Lightfinder ModeExposure Settings Image AppearanceDay/Night Iris configurationIris adjustment Set Shutter toGo to Video & Audio Video Stream and select the Image tab To configure the view areaView Area OverlayUse Overlay Text in an Action Rule Overlay ImageGo to Video & Audio Overlay Image Basic Privacy MaskFocus Go to Events Action RulesAudio Modes Audio SettingsAudio Input Audio Output Audio ClipsBrowser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer SettingsFor more information about I/O ports, see I/O Ports on Go to Setup Live View ConfigUser Defined Links Output ButtonsGuard Tour Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControl Queue Install PTZ DriverDevice Settings AdvancedOperator Same as administrator but with lower priority Shock Detection DetectorsCamera Tampering Motion DetectionParameter Object Size History Sensitivity Description Set Up Motion Detection WindowsMotion Detection Parameters Go to Detectors Motion DetectionAudio Detection Application Licenses Install ApplicationGo to Setup Applications ApplicationsAxis Q1614 Network Camera Go to Events Action Rules and click Add Set Up Action RulesEvents TriggersSystem Input SignalHardware StoragePTZ Control Set Up Email RecipientsAdd Recipients ActionsGo to Events Schedules and click Add Set Up RecurrencesCreate Schedules To create a new scheduleGo to Recordings List RecordingsFind Recordings Play RecordingGo to Recordings Continuous Export Video ClipContinuous Recording To play a recording, follow these stepsLanguages IP Address Filter System OptionsSecurity UsersCertificates IeeeGo to System Options Security Ieee Date & Time To install a self-signed certificateGo to Setup System Options Security Certificates Click Install certificate and upload the certificateNetwork Basic TCP/IP SettingsDNS Configuration Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service Axis Internet Dynamic DNS Service requires IPv4NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 Mount and Unmount SD Card StorageBonjour SD CardGo to System Options Storage Click Network Share Under General Settings, select Autoformat toNetwork Share To add a network sharePorts MaintenanceLogs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsFile Upload Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery ProcedureProduct is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browserSetup Video & Audio Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalPoor audio quality SettingsStorage and disk management problems No audioTechnical Specifications Audio output Function/group Specifications AudioSpecification Network Security Audio inputWeight Function/group Specifications Video bufferPower ConnectorsFunction Pin Specifications ConnectorsFunction/group Specifications Warranty ConnectorFunction Pin RS485/422 ConnectorPerformance Considerations OutputAxis Q1614 Network Camera M4.4