Axis Communications axis communications dome network camera Audio Clips, Audio Output, G726

Page 22

AXIS Q6035 PTZ Dome Network Camera

Video and Audio

•G726

Sample rate - The number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but also requires a greater bandwidth.

Bit rate - Set the required bit rate depending on the selected encoding. A higher bit rate will give better audio quality. A lower bit rate may have latency or delay, but will require less bandwidth.

For more information about these settings, please see the online help .

Audio Output

An external speaker can be connected to the product’s Audio-out connector (a built-in ampliﬁer is required for this). The output can be connected to another ampliﬁer with speakers. A stereo connector must be used for the audio out.

Conﬁgure the audio output settings under Video & Audio > Audio Settings.

Note

Amulti-connector cable (available from Axis; Multi-Connector Cable (sold separately)) is required when connecting external audio equipment to the Axis product.

Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the sound is too high, choose a lower dB.

Audio Clips

An audio clip is a sound ﬁle that can be played when events occur or directly from the Live View page. The audio clip must ﬁrst be uploaded to the Axis product or recorded by a microphone connected to the product.

To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips. For more information see the online help.

To conﬁgure the Axis product to play audio clips when an event occurs, an action rule must be set up. For more information, see Events, on page 34.

Note

Audio clips cannot be used if the product’s audio functionality is enabled. The audio functionality is enabled on the Audio tab under Video & Audio > Video Stream.

22

Image 22

Contents Axis Q6035 PTZ Dome Network Camera Liability SafetyAbout this document Intellectual Property RightsTable of Contents Axis Q6035 PTZ Dome Network CameraSymptoms, Possible Causes and Remedial Actions Hardware Overview ConnectorsHardware Overview For technical speciﬁcations, seeMidspan LED Indicators LED IndicatorsColor Indication Access from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariConﬁgure Capture Mode Access from the InternetSet the Root Password Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar PTZ Controls AMC Audio ControlsAxis Q6035 PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterImage Click Save to apply the new settingsStream Proﬁles 264Go to Setup Video & Audio Camera Settings Camera SettingsCapture Mode Image AppearanceOverlay Exposure SettingsImage Settings Wide Dynamic RangeOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Input Audio SettingsAudio Modes G711Audio Output Audio ClipsG726 Live View Conﬁg Default Viewer for BrowsersLive View Conﬁg User Deﬁned Links Viewer SettingsGo to Setup Live View Conﬁg Output ButtonsAxis Q6035 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom AutotrackingExclude Areas ConﬁgurationMax Limits Gatekeeper Guard TourTour Recording Osdi ZonesAdvanced LimitsControl Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Motion DetectionAudio Detection Motion Detection ParametersApplications ApplicationsEvents EventsPTZ Control Setting Up an Action RuleConvert Event Types to Action Rules Go to Events Action Rules and click AddRecipient Use with action RecipientsSchedules Go to Events Recipients and click AddRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingAxis Q6035 PTZ Dome Network Camera Security System OptionsSystem Options UsersIeee Date & TimeAudio Support IPv4 Address Conﬁguration Basic TCP/IP SettingsNetwork IPv6 Address ConﬁgurationAdvanced TCP/IP Settings Link-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service Smtp emailRTP/H.264 StorageUPnPTM BonjourPorts Ports & DevicesNetwork Share Go to System Options Storage Click Network ShareMaintenance SupportFile Upload Reset to Factory Default SettingsScripting Plain Conﬁg192.168.0.90 Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatNo images displayed on web Video and image problems, generalSetup Video & Audio Camera Settings Overlay image is not displayedStorage and disk management problems Problems uploading ﬁlesSettings Browser freezesTechnical Speciﬁcations Technical SpeciﬁcationsPower Installation aidMaintenance ConnectorsMulti-Connector Cable sold separately Max voltage = +40 V DC Function Pin SpeciﬁcationsTo +40 V DC With the load, for protection against voltage transientsDC power input Connection diagramPerformance Considerations Axis Q6035 PTZ Dome Network Camera M1.8