Axis Communications axis communications dome network camera user manual Advanced TCP/IP Settings

Page 43

AXIS Q6035 PTZ Dome Network Camera

System Options

AXIS Video Hosting System (AVHS)

AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting

AVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.

One-click enabled - Press the product’s control button (see Hardware Overview, on page 5 ) to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.

Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient to use the one-click installation.

AXIS Internet Dynamic DNS Service

AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net

To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. Under Services, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currently registered at AXIS Internet Dynamic DNS service for the product can at any time be removed.

Advanced TCP/IP Settings

DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis Q6035 PTZ Dome Network Camera Intellectual Property Rights SafetyAbout this document LiabilityAxis Q6035 PTZ Dome Network Camera Table of ContentsSymptoms, Possible Causes and Remedial Actions For technical specifications, see ConnectorsHardware Overview Hardware OverviewMidspan LED Indicators LED IndicatorsColor Indication Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserNetwork TCP/IP Advanced Access from the InternetSet the Root Password Configure Capture ModeControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis Q6035 PTZ Dome Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageImage Appearance Camera SettingsCapture Mode Go to Setup Video & Audio Camera SettingsWide Dynamic Range Exposure SettingsImage Settings OverlayOverlay Image Privacy MaskGo to Video & Audio Overlay Image G711 Audio SettingsAudio Modes Audio InputAudio Output Audio ClipsG726 Live View Config Default Viewer for BrowsersLive View Config Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis Q6035 PTZ Dome Network Camera Autotracking Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomExclude Areas ConfigurationMax Limits Guard Tour GatekeeperLimits Osdi ZonesAdvanced Tour RecordingControl Queue Operator Same as administrator but with lower priorityControls Motion Detection Set Up Motion Detection WindowsDetectors DetectorsMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsGo to Events Action Rules and click Add Setting Up an Action RuleConvert Event Types to Action Rules PTZ ControlGo to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add RecurrencesContinuous Recording RecordingsRecordings Recording ListAxis Q6035 PTZ Dome Network Camera Users System OptionsSystem Options SecurityIeee Date & TimeAudio Support IPv6 Address Configuration Basic TCP/IP SettingsNetwork IPv4 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264Go to System Options Storage Click Network Share Ports & DevicesNetwork Share PortsSupport MaintenancePlain Config Reset to Factory Default SettingsScripting File Upload192.168.0.90 Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyOverlay image is not displayed Video and image problems, generalSetup Video & Audio Camera Settings No images displayed on webBrowser freezes Problems uploading filesSettings Storage and disk management problemsTechnical Specifications Technical SpecificationsConnectors Installation aidMaintenance PowerMulti-Connector Cable sold separately With the load, for protection against voltage transients Function Pin SpecificationsTo +40 V DC Max voltage = +40 V DCDC power input Connection diagramPerformance Considerations Axis Q6035 PTZ Dome Network Camera M1.8
Top Page Image Contents