Axis Communications axis communications dome network camera Reset to Factory Default Settings

Page 49

AXIS Q6035 PTZ Dome Network Camera

System Options

Server Report - Provides information about the product status in a pop-up window. The Access Log is automatically included in the Server Report.

Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support.

Connection List - Lists all clients that are currently accessing media streams.

Crash Report - Generates an archive with debugging information. The report takes several minutes to generate.

The log levels for the System Log and the Access Log are set under System Options > Support > Logs & Reports > Configuration. The Access Log can be configured to list all connections to the product (select Critical, Warnings & Info). If required, a different log level can be used when sending emails.

Advanced

Scripting

Scripting allows experienced users to customize and use their own scripts.

NOTICE

Improper use may cause unexpected behavior and loss of contact with the Axis product.

Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems with customized scripts.

To open the Script Editor, go to System Options > Advanced > Scripting. It is recommended to create a backup file before customizing the scripts. If a script causes problems, reset the product to its factory default settings, see page 49.

For more information, see www.axis.com/developer

File Upload

Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings. To upload a file, go to System Options > Advanced > File Upload.

Uploaded files are accessed through http://<ip address>/local/<user>/<file name> where <user> is the selected user group (viewer, operator or administrator) for the uploaded file.

Plain Config

Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page. Help is available from the standard help pages.

To open Plain Config, go to System Options > Advanced > Plain Config.

Reset to Factory Default Settings

This will reset all parameters, including the IP address, to the factory default settings:

1.Press and hold the Control button and the Power button for about 15 seconds until the Status indicator flashes amber (see Hardware Overview, on page 5 ).

2.Release the Control button but continue to hold down the Power button for about 1 minute until the Status indicator turns green.

3.Release the Power button and re-assemble the product.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Axis Q6035 PTZ Dome Network Camera About this document SafetyLiability Intellectual Property RightsAxis Q6035 PTZ Dome Network Camera Table of ContentsSymptoms, Possible Causes and Remedial Actions Hardware Overview ConnectorsHardware Overview For technical specifications, seeMidspan LED Indicators LED IndicatorsColor Indication Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Access from the InternetConfigure Capture Mode Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls PTZ ControlsAxis Q6035 PTZ Dome Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Profiles Click Save to apply the new settingsImage 264Capture Mode Camera SettingsGo to Setup Video & Audio Camera Settings Image AppearanceImage Settings Exposure SettingsOverlay Wide Dynamic RangeOverlay Image Privacy MaskGo to Video & Audio Overlay Image Audio Modes Audio SettingsAudio Input G711Audio Output Audio ClipsG726 Live View Config Default Viewer for BrowsersLive View Config Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis Q6035 PTZ Dome Network Camera PTZ Pan Tilt Zoom Preset PositionsPTZ Pan Tilt Zoom AutotrackingExclude Areas ConfigurationMax Limits Guard Tour GatekeeperAdvanced Osdi ZonesTour Recording LimitsControl Queue Operator Same as administrator but with lower priorityControls Detectors Set Up Motion Detection WindowsDetectors Motion DetectionMotion Detection Parameters Audio DetectionApplications ApplicationsEvents EventsConvert Event Types to Action Rules Setting Up an Action RulePTZ Control Go to Events Action Rules and click AddSchedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add RecurrencesRecordings RecordingsRecording List Continuous RecordingAxis Q6035 PTZ Dome Network Camera System Options System OptionsSecurity UsersIeee Date & TimeAudio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 Link-Local IPv4 AddressSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts Go to System Options Storage Click Network ShareSupport MaintenanceScripting Reset to Factory Default SettingsFile Upload Plain Config192.168.0.90 Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallySetup Video & Audio Camera Settings Video and image problems, generalNo images displayed on web Overlay image is not displayedSettings Problems uploading filesStorage and disk management problems Browser freezesTechnical Specifications Technical SpecificationsMaintenance Installation aidPower ConnectorsMulti-Connector Cable sold separately To +40 V DC Function Pin SpecificationsMax voltage = +40 V DC With the load, for protection against voltage transientsDC power input Connection diagramPerformance Considerations Axis Q6035 PTZ Dome Network Camera M1.8
Top Page Image Contents