Asante Technologies Voyager II user manual Camera Setting

Page 10

Camera Setting

After the hardware has been installed, insert the attached CD in the computer and execute IP FINDER.EX following the steps below to search and change the IP address of the camera.

1.Start the machine.

Execute the IP Finder.exe from the attached CD.

2.Search the camera (Search)

Search the product from your LAN. The factory IP setting 192.168.0.20 appears on the screen.

1. Click Search to find the IPCAM on the LAN.

3.Changing the IP address and related settings for the network environment

When you find the camera, click it and the settings appear on the right side. Change the settings for the new network environment you need.

2.Enter the settings for the new network environment you need.

※You must enter new settings in the IP, Netmask and Gateway fields and keep the settings in other fields unchanged.

4.Submit data (Submit)

Click Submit to validate new settings.

10

Image 10

Contents Voyager Ddns Packaging Contents System requirements LANIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Camera Main DescriptionsControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File Basic Setting System settingBasic Setting System System info Basic Setting Video/Image Basic Setting Video Image Video ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Sound Basic Setting Audio Audio sound settingBasic Setting UserUser Basic Setting User User List access privilege listBasic Setting User User Setting privilege setting Basic Setting Network Network setting Basic Setting Network Network wired network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter Basic Setting IP Filter GeneralApplication Setting Event event trigger setting Application SettingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Application Setting Factory Default Resets all parametersFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Image Resolution Average range of Data Sizes Attachment B Bandwidth EstimationAttachment C Troubleshooting and FAQs Question Answer and SolutionAccess to Camera FTP Camera Image Quality