Asante Technologies Voyager II user manual Add Event Add Event setting

Page 56

Add Event : Add Event setting page

Options:

• General:

Name:

Name the trigger event here.

• Response to event trigger: the time setting of the trigger event

Always:

Always monitoring

During time: Check the date you want to monitor (Sun~Sat) and the duration of monitoring here. For example, if you want to set the camera to monitor from 7 pm after work to 7 am next morning from Monday to Friday, check the boxes from Monday to Friday, enter “19:00” in the “Start From” field, and enter “12:00” in the “Duration” field.

Never:

Do not set the time.

•Trigger by: sources of trigger events (Note: You can only set one trigger event once.)

Alarm input:

The alarm is triggered by the security equipment connected from the

 

DI terminals behind the machine, such as door/window detectors,

 

infrared sensors.

Motion

The alarm is triggered when motion is detected. The camera will

Detection:

send an alarm when any objects appear in the set detection area.

Video Loss:

The alarm is triggered by video loss. The camera will send an alarm

 

when there is no video transmission due to camera sabotage or other

 

reasons.

On boot:

The alarm is triggered by reboot. The camera will send an alarm

 

when the system is rebooted due to power shortage, sabotage, or

 

other reasons.

•Response process: trigger event response (Note: Multiple selections are available)

Active alarm

An event is responded by the security equipment connected from the

out:

DI terminal behind the machine, such as high-decibel alarms, light

 

projectors. You can set the alarm duration in the “Duration” field.

Send mail:

The alarm will be sent to you by email.

Send HTTP

The alarm will be sent to the HTTP server you specified. To use this

notification:

function, set the coordinative HTTP server in the Event Server

 

setting page in advance.

Send TCP

The alarm will be sent to the TCP Server you specified. To use this

notification:

function, set the coordinative TCP server in the Event Server setting

 

page in advance.

Go to preset

The camera will move to the location you specified when a trigger

location:

event occurs. To use this function, set the present location of the

 

camera in the main page in advance.

Return to

The camera will move back to the home position (center)

home after

 

event:

 

Click Save to save and activate your settings when you completed setting.

56

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Voyager Ddns Packaging Contents System requirements LANIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Camera Main DescriptionsControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File Basic Setting System System info System settingBasic Setting Basic Setting Video/Image Basic Setting Video Image Video ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Sound Basic Setting Audio Audio sound settingBasic Setting UserUser Basic Setting User User List access privilege listBasic Setting User User Setting privilege setting Basic Setting Network Network setting Basic Setting Network Network wired network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter Basic Setting IP Filter GeneralApplication Setting Event Event List trigger event setting Application SettingApplication Setting Event event trigger setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Application Setting Factory Default Resets all parametersFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Image Resolution Average range of Data Sizes Attachment B Bandwidth EstimationAttachment C Troubleshooting and FAQs Question Answer and SolutionAccess to Camera FTP Camera Image Quality
Top Page Image Contents