Asante Technologies Voyager II user manual System Instructions

Page 6

System Instructions

1.DC power cable: The DC input connector has a socket to connect the product to a power source.

2.Ethernet connector: A RJ-45 connector is provided for connection to the 10Base-T Ethernet cable or 100 Base-T High Speed Ethernet cable. This port can automatically detect or coordinate the transmission rate of the network.

3.Use a video/audio output cable for external video/audio transmission if required.

Wiring of the product

DC Power

Plug the power cable in the power socket on the product.

Tripod

The product can be fixed on the wall (Fig. 1) or hung from the ceiling (Fig. 2).

When using the attached plastic anchor and screws to fix the product, make sure that no steel bars or power cables exist behind the position where the product is to be fixed. Some walls or ceilings may not be strong enough to support the tripod and the product. Pay attention during installation to avoid injury that might be brought about due to falling of the product.

6

Image 6

Contents Voyager Ddns Packaging Contents System requirements LANIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Camera Main DescriptionsControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File System setting Basic SettingBasic Setting System System info Basic Setting Video/Image Basic Setting Video Image Video ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Sound Basic Setting Audio Audio sound settingBasic Setting UserUser Basic Setting User User List access privilege listBasic Setting User User Setting privilege setting Basic Setting Network Network setting Basic Setting Network Network wired network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter Basic Setting IP Filter GeneralApplication Setting Application Setting Event event trigger settingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Application Setting Factory Default Resets all parametersFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Image Resolution Average range of Data Sizes Attachment B Bandwidth EstimationAttachment C Troubleshooting and FAQs Question Answer and SolutionAccess to Camera FTP Camera Image Quality