Asante Technologies Voyager II user manual PPPoE setting

Page 45

3.Key in the IP address of the camera and enter "PPPoE Setting" following the route Setting ￿ Basic Setting ￿ Network￿ PPPoE.

4.Key in the xDSL "Username" and "Password" acquired from your ISP. Click Save to confirm the setting.

5.Where the ADSL modem and the camera is connected via a switch-hub, you can press “Reboot” or restart the machine manually to try PPPoE dialing when the setting of the camera has been completed.

6.To know the new IP address acquired when the PPPoE dialing has been executed successful, follow the route Setting ￿ Basic Setting ￿ Network￿Notification for the IP information. You can acquire the new IP address via SMTP, FTP, and HTTP. Refer to the “Notification Setting” page for more information.

Note: You can use the DDNS function to access the camera. Refer to the “DDNS Setting” page for more information.

PPPoE setting

￿Basic Setting > Network > PPPoE > PPPoE

Dial: You can select whether or not to dial when you boot the machine (On Boot or Off).

Username: Enter the username provided by your ISP.

Password: Enter the password.

￿Basic Setting > Network > PPPoE > PPPoE Information

IP Address: The IP address acquired when the dialing has been executed successfully.

Subnet Mask: The subnet mask information acquired when the dialing has been executed successfully.

Default Gateway: The gateway information acquired when the dialing has been executed successfully.

DNS: The ISP domain name acquired when the dialing has been executed successfully.

45

Image 45
Contents Voyager Ddns Packaging Contents LAN System requirementsIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Descriptions Camera MainControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File System setting Basic SettingBasic Setting System System info Basic Setting Video Image Video Image Basic Setting Video/ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Audio sound setting Basic Setting Audio SoundBasic Setting User User List access privilege list Basic Setting UserUserBasic Setting User User Setting privilege setting Basic Setting Network Network wired network setting Basic Setting Network Network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter General Basic Setting IP FilterApplication Setting Application Setting Event event trigger settingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Resets all parameters Application Setting Factory DefaultFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Attachment B Bandwidth Estimation Image Resolution Average range of Data SizesQuestion Answer and Solution Attachment C Troubleshooting and FAQsAccess to Camera FTP Camera Image Quality