Asante Technologies Voyager II user manual Hardware Installation

Page 9

Hardware Installation

You can install the product on your desk or use the attached tripod to hang it from the wall or ceiling. (The product is provided with image flip function. Refer to the “Control Panel” for more information.)

Confirm the position for installation of the camera

1. Connect to the LAN cable

Plug one end of your LAN cable in the LAN socket on the back of the camera and connect the other end to the network that you want to access to.

Pluck in LAN socket

2. Connect to the power source

Plug one end of the attached power cable in the power socket of the product and connect the other end to the AC power source. When the product has been connected and turned on, the Pan/Tile camera turns to the original point automatically and the LED: Event status lights green. When any link to the network is detected, the LED: Link status flashes green.

Connect to the power supply and check that the LED functions normally.

Note 1: You can install the product quickly with reference to the quick guide attached to the product.

You can specify three LED statuses by setting: 1.ON; 2.OFF; 3.Flash. For more information about setting of LED status, refer to the “System Setting”.

Note 2: Don't install the camera at an oblique angle to avoid disrupted operation of the machine.

9

Image 9

Contents Voyager Ddns Packaging Contents LAN System requirementsIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Descriptions Camera MainControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File System setting Basic SettingBasic Setting System System info Basic Setting Video Image Video Image Basic Setting Video/ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Audio sound setting Basic Setting Audio SoundBasic Setting User User List access privilege list Basic Setting UserUserBasic Setting User User Setting privilege setting Basic Setting Network Network wired network setting Basic Setting Network Network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter General Basic Setting IP FilterApplication Setting Application Setting Event event trigger settingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Resets all parameters Application Setting Factory DefaultFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Attachment B Bandwidth Estimation Image Resolution Average range of Data SizesQuestion Answer and Solution Attachment C Troubleshooting and FAQsAccess to Camera FTP Camera Image Quality