Asante Technologies Voyager II user manual Basic Setting Network PPPoE dial-up networking setting

Page 44

image transmission. However, video fragment or mosaics may occur due to poor transmission quality.

Streaming port setting

Basic Setting > Network > PPPoE (dial-up networking setting)

PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a high-speed wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless modem). The user need only to equip the PC with an Ethernet card and apply to ISP (such as HiNet) and ADSL provider (such as Chunghwa Telecom) for ADSL service to roam the Internet through ordinary twisted copper wires.

PPPoE: Point to Point Protocol over Ethernet is applicable to networking via a xDSL or cable modem. PPPoE setting must be executed in the LAN environment for your PC to connect to ADSL. Follow the steps below to complete the setting:

1.Dial: You can select whether or not to dial when you boot the machine.

2.Use DHCP or fixed IP for connection to the LAN environment.

44

Image 44

Contents Voyager Ddns Packaging Contents System requirements LANIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Camera Main DescriptionsControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File Basic Setting System System info System settingBasic Setting Basic Setting Video/Image Basic Setting Video Image Video ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Sound Basic Setting Audio Audio sound settingBasic Setting UserUser Basic Setting User User List access privilege listBasic Setting User User Setting privilege setting Basic Setting Network Network setting Basic Setting Network Network wired network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter Basic Setting IP Filter GeneralApplication Setting Event Event List trigger event setting Application SettingApplication Setting Event event trigger setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Application Setting Factory Default Resets all parametersFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Image Resolution Average range of Data Sizes Attachment B Bandwidth EstimationAttachment C Troubleshooting and FAQs Question Answer and SolutionAccess to Camera FTP Camera Image Quality