Asante Technologies Voyager II user manual Basic Setting Network Streaming steaming setting

Page 43

The IP address of the camera is 192.168.0.20 by default when DHCP is “OFF”. When you select “DHCP ON” and access to the DHCP network environment, the camera will automatically send a DHCP packet to request an IP address. This IP address is assigned automatically from the DHCP server on the network. No additional settings are required for this page unless you need to change the network configuration. The DHCP status of the camera is “OFF” by default.

Other settings:

For IP address, Subnet mask, Default gateway, DNS 1, and DNS 2, the DHCP server will assign these values automatically when DHCP is in "ON" status; otherwise, you need to key in the values manually.

Test and save wireless settings:

.Finally, click “Connect” to test and save the wireless settings.

Test connection status is shown here

Click connect button to test and save.

Basic Setting > Network > Streaming (steaming setting)

Setting of the video steaming port (HTTP and factory default are recommended)

1.HTTP: Port 80 can pass through most firewalls. Video streams are transmitted through HTTP Port (80 by default) to ensure passing through firewalls.

2.RTSP: Port 554 uses a fixed port (i.e. TCP) or can be defined by users to ensure reliable data transmission. Video streams are transmitted through RTSP Port (554 by default) to avoid video fragment or mosaics due to poor transmission quality.

3.RTP: Port 50000 to 60000 are UDP ports and can be defined by users. They provide the fastest but unreliable transmission service. Video streams are transmitted thought UDP Port (50000~60000 by default) to ensure the fastest

43

Image 43

Contents Voyager Ddns Packaging Contents LAN System requirementsIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Descriptions Camera MainControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File Basic Setting System settingBasic Setting System System info Basic Setting Video Image Video Image Basic Setting Video/ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Audio sound setting Basic Setting Audio SoundBasic Setting User User List access privilege list Basic Setting UserUserBasic Setting User User Setting privilege setting Basic Setting Network Network wired network setting Basic Setting Network Network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter General Basic Setting IP FilterApplication Setting Event event trigger setting Application SettingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Resets all parameters Application Setting Factory DefaultFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Attachment B Bandwidth Estimation Image Resolution Average range of Data SizesQuestion Answer and Solution Attachment C Troubleshooting and FAQsAccess to Camera FTP Camera Image Quality