Asante Technologies Voyager II user manual

Page 51

Basic Setting > Network > Notification Of IP Address Change (IP address change notice)

This setting is not necessary for a fixed IP. For a dynamic IP, you need to update the IP address every time you connect to the Internet to access the camera. This setting allows you to update the IP address by the automatic notification of IP address change. Choose one of the following three notice options to update the IP address:

1. Notification via SMTP mail server

Basic Setting > Network > Notification of IP Address Change > SMTP Notification

SMTP Notification: notification via SMTP mail server

SMTP SendTo: the recipient, i.e. xxx@xxx.com

SMTP Subject: mail subject

Select Save to complete and activate your settings.

2. Notification via FTP server

Basic Setting > Network > Notification of IP Address Change > FTP Notification

FTP Server: FTP Server name.

FTP Port: FTP port. The default setting is 21 (recommended).

FTP Upload path: the path to upload files.

FTP Login name: the name to log in the FTP.

FTP Login Password: the password to log in the FTP. Select Save to complete and activate your settings.

3. Notification via HTTP server

Basic Setting > Network > Notification of IP Address Change > HTTP Notification

Server: the address of the server, i.e. http://.

Port: the port to access HTTP. The default setting is 80 (recommended).

Parameter: the setting of the parameters, refer to the installation setting of your HTTP server.

Refer to the installation setting of your HTTP server for the setting of the parameters (such as Username, Password, and Proxy).

Select Save to complete and activate your settings.

51

Image 51

Contents Voyager Ddns Packaging Contents LAN System requirementsIntroduction System Instructions Fixed on a wall Fig Fixed on a ceiling Fig MIC in/Audio Out Focus knob Hardware Installation Camera Setting MAC Factory default network identity of the machine Camera Setting from a Router Change the Internet Explorer Setting Enter the Main Setup prompt screen Descriptions Camera MainControl panel Preset presets the rotation points for the camera 16 points Page Ato Selects a language Select an image size Select a video stream protocol Recording button Snapshot button Click the Path field to Select the folder to save File System setting Basic SettingBasic Setting System System info Basic Setting Video Image Video Image Basic Setting Video/ImageAdd a new link Video stream screen Select a video streaming format Select a FPS Basic Setting Video Image OSD Page Basic Setting Audio Audio sound setting Basic Setting Audio SoundBasic Setting User User List access privilege list Basic Setting UserUserBasic Setting User User Setting privilege setting Basic Setting Network Network wired network setting Basic Setting Network Network settingBasic Setting Network Wireless wireless network setting Page Network authentication type Encryption options HEX Basic Setting Network Streaming steaming setting Basic Setting Network PPPoE dial-up networking setting PPPoE setting Ddns setting Basic Setting Network UPnP Universal Plug and Play Open Windows firewall option Basic Setting Network Smtp Server mail server setting Basic Setting Network Samba Page Notification setting Basic Setting Date/Time date/time setting Basic Setting IP Filter General Basic Setting IP FilterApplication Setting Application Setting Event event trigger settingApplication Setting Event Event List trigger event setting Add Event Add Event setting Page Page Add FTP setting Add Http setting Add TCP setting Application Setting Motion Detection Application Setting Firmware upgrade Page Resets all parameters Application Setting Factory DefaultFile backup Application Setting Reboot Attachment a External Alarm External Alarm I/O Circuit Diagram Attachment B Bandwidth Estimation Image Resolution Average range of Data SizesQuestion Answer and Solution Attachment C Troubleshooting and FAQsAccess to Camera FTP Camera Image Quality