Pattern Setup
You can manually record your pan/tilt/zoom movements to a monitoring pattern for up to 2 minutes.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)
1.Select <MAIN MENU>-<AUTO SET>.
2.Select the pattern number. PATTERN setup screen appears.
3.Select the <POSITION> and set the pattern's starting position and press [ENTER].
PATTERN SET 1 
<POSITION>
START
English
4.Select the <START> and move the camera using pan/tilt/zoom.
5.Your manual camera actions will be recorded for up to 2 minutes, and returns to the previous menu automatically.
To stop manual recording and return to the previous menu before 2 minutes, press [ENTER].
Scan Setup
PATTERN SET 1 
<POSITION>
START
You can set the SCAN operation to include a defined preset position.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)
1.Select <MAIN MENU>-<AUTO SET>.
2.Select the scan number. SCAN setup screen appears.
3.Move the cursor to a number with the [] mark which contains a defined preset.
4.Press [ENTER].
[S] mark appears beside the [] and the corresponding preset is included in the scan.
|
| SCAN 1 |
| |
0S | 1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 | 9 |
10 | 11 | 12 | 13 | 14 |
15 | 16 | 17 | 18 | 19 |
20 | 21 | 22 | 23 | 24 |
25 | 26 | 27 | 28 | 29 |
30 | 31 | 1/16 |
|
|
|
| |
| |
M | SCAN numbers configured for a certain page can be saved only in the corresponding |
| page. Make sure to save it before moving to the next page. |
| English _41 |